Publicité
Phillips screwdriver w/ medium blade. Leak Detection Solution.
To prevent any injuries, please put on gloves before installation.
This product contains sharp edges on the panels, cylinder housing and handle please
install with care.
ASSEMBLY INSTRUCTIONS
1. Attach wheel kit (J) to base (K). Line up holes in wheel bracket with
corresponding holes in base, insert two bolts M8 x 16 (AA) through holes, and
finger tighten two M8 flange nuts (PP). Reverse the base (K), fix the ground fixer
(LL) to the base with two boltsM6X10 (MM) and two washers Φ6 (GG), Secure
the ground fixer (LL) with two nuts M6 (NN). Fix another two-ground fixer (LL)
with bolts and nuts, and reverse the base (K).
Note: To secure the unit, please use three nails M8x100 (not included) to
nail the unit to the ground
Publicité
