Introduction - Conrad VC-602 Notice D'emploi

GB

Introduction

Dear Customer,
With the Current Clamp VC - 602 you have acquired a measuring
instrument built to the latest technological standard. It combines
the advantages of a handy clamp ammeter with those of a multi-
meter in one unit.
Construction complies with DIN VDE 0411, part 1 for measu-
ring instruments = EN 61010-1 or EN 61010-2-32 (for current
clamps). In addition it has been EMC-tested and fulfils the re-
quirements of the applicable European and national directives.
Conformance to these has been proven; the relevant docu-
ments are lodged with the manufacturer.
To maintain this condition and to guarantee safe operation, the
user must observe these operating instructions without fail!
When queries arise, please consult our technical
specialists
Germany: Tel. +49 (0)180 531 21 19
Mon - Fri 08.00 to 18.00
Austria: Tel. +43 (0)72 42 20 30 60
Mon - Thu 08.30 to 12.00, 13.00 to 16.00
Fri 08.00 to 12.00
Switzerland: Tel. +41 (0)848 87 78 11
Mon - Thu 08.30 to 12.00, 13.00 to 16.00
Fri 08.00 to 12.00
26