Publicité
When filing, always work from the outside of the nail towards the tip!
Always check results regularly during treatment. As soon as the application
becomes unpleasant, stop the treatment.
7. Cleaning and maintenance
Before cleaning the power unit, always unplug it from the socket outlet!
– Clean the instrument with a slightly moistened cloth. You can also
moisten the cloth with mild soap suds to remove more stubborn dirt.
– If necessary, for reasons of hygiene, the attachments can be cleaned with
a cloth or brush moistened with alcohol. Dry them carefully afterwards.
– Do not drop the instrument.
– Make sure that no water enters the instrument. But if this should happen,
do not use the instrument again until it is completely dry.
– Do not use chemical detergent or scouring agents for cleaning.
– Never immerse the instrument or plug-in power unit in water or other liquids.
8. Accessories and replacement parts
To purchase accessories and replacement parts, please visit www.beurer.com
or contact the corresponding service address (according to the service
address list) in your country. Accessories and replacement parts are also
available from retailers.
Designation
1 x Fine-Grain Sapphire Wheel
1 x Coarse-Grain Sapphire
Wheel
1 x Sapphire Cone
1 x Felt Cone
1 x Sapphire Callus Rasp
1 x Cylindrical Cutter
1 x Flame-Shape Cutter
1 x Protective Nail Dust Cap
8 – Protective Nail Dust Cap
Captures nail dust as you file to minimise inhalation
and clean up time.
Item number and/or order number
574.09
23
Publicité
