Publicité
ASSEMBLY
NOTICE:
Do not run the pressure washer pump without water
supply connected and turned on, as this may dam-
age the high pressure seals and decrease pump
life. Completely unwind the hose from its reel or coil
and make sure the hose is not being restricted by
tires, rocks, or any other objects that may lessen or
prevent water flow to the pressure washer.
DO NOT OVERTILT ThE UNIT!
CONNECTING ThE hIGh PRESSURE hOSE TO
ThE PUMP
See Figure 11.
Completely uncoil and straighten the high pressure hose
to prevent kinks.
NOTE: See Using The high Pressure hose in Operation
for more information about using the high pressure hose.
Insert the inlet coupler on the end of the high pressure
hose into the collar until it clicks in place and is secured
properly.
Pull on the hose to be certain it is properly secured.
9 - English
Publicité
