Publicité
English
PROBLEM
Check power cord, plugs and outlet.
Motor does not run
Ensure the on/off switch is in the
ON position (I).
Remove blockages in the nozzle,
extension wands, hose or lter.
Replace the disposable lter bag.
Suction capacity
Check for proper installation of the
decreases
lter.
Clean or replace the lter.
Empty the dust tank, refer
the tank
instructions.
Thermal overload has been tripped:
1. Turn the vacuum off and
disconnect vacuum cleaner from
power source.
2. Empty the dust tank, if needed.
Vacuum stops
3. Allow the unit to cool.
running
4. Plug the power cord into an
appropriate outlet and turn on/off
switch to the ON position (I) to
test.
Check for proper installation of the
lter.
Ensure lter are not damaged;
replace if necessary.
Dust comes out
while vacuuming
Ensure lter seals are in place and
are secure.
Check the t of the vacuum head.
WARNING:
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or a similarly
quali ed person in order to avoid a hazard.
WARNING:
This product is NOT to be used for ltering of
pathogens, for example COVID-19. Follow all local,
state and federal guidance on general cleaning
practices.
TOOL GUARANTEE
SOLUTION
to Empty
Operating
under
3
YEAR
LIMITED
GUARANTEE
20
Publicité
