Publicité
TIPS
Which type of water to use?
Your appliance has been designed to function with untreated tap water. If your water is very hard, it's possible
to mix untreated tap water with storebought distilled or demineralised water in the following proportion: 50%
tap water / 50% distilled water.
Which type of water not to use?
The types of water listed below contain organic waste or mineral elements that can cause spitting, brown staining,
or leakage: water from clothes dryers, scented or softened water, water from air conditioners.
If problems occur?
Water drips from the
holes in the
soleplate.
Brown streaks come
through the holes in
the soleplate and
stain the linen.
The soleplate is dirty
or brown and can
stain the linen.
The soleplate is
scratched.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50-60Hz
Power: 1600W
GUARANTEE AND CUSTOMER SERVICE
Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has occurred
during production or transportation, please return the device to your dealer.
For the purchased device we provide 2 years guarantee, commencing from the day of sale. If you have a defective
product, you can directly go back to the point of purchase.
Defects which arise due to improper handling of the device and malfunctions due to interventions and repairs
by third parties or the fitting of non-original parts are not covered by this guarantee. Always keep your receipt,
without the receipt you can't claim any form of warranty. Damage caused by not following the instruction manual,
will lead to a void of warranty, if this results in consequential damages then we will not be liable. Neither can we
hold responsible for material damage or personal injury caused by improper use or if the instruction manual are
not properly executed. Damage to accessories does not mean free replacement of the whole appliance. In such
The chosen temperature is too low
and does not allow for the
formation of steam.
You are using steam while the iron
is not hot enough.
You have stored the iron horizontal,
without emptying it and without
switching off the steam function.
You are using chemical descaling
agents.
Fabric fibers have accumulated in
the holes of the soleplate and are
burning.
Your linen has not been rinsed
sufficiently or you have ironed a
new garment before washing it.
You are ironing with a too high
temperature.
You have placed your iron flat on a
metal rest-plate or ironed over a
zip.
Position the thermostat to the maximum
temperature setting.
Wait until the control light goes out.
Empty the iron after each use, and store it
vertical.
Do not add any descaling agents to the water.
Let the iron cool down and clean the soleplate
with a sponge. Vacuum the holes of the
soleplate from time to time.
Make sure that your laundry is rinsed
sufficiently so as to remove any deposits of
soap or chemical products on new clothes.
Let the iron cool down and clean the soleplate
with a sponge. Select the appropriate
program.
Always set your iron on its heel.
Do not iron over zips.
- 5 -
Publicité
