Publicité
GB
20
tE P
21
tE P
28
tE P
30
CAL1
Default value:
0°C of offset
Values:
between -5.0°C and 5.0°C
Displaying of measured temperature by external sensor
➤ FLOOR temperature if thermostat is paired to a connecting box;
➤ FLOOR temperature if parameter 30 is set to "floor" or "floor limit";
32
➤ AMBIENT temperature if parameter 30 is set to "ambient".
8
C
If "Err" is displayed, external/ambient sensor isn't connected or damaged:
°
Er
.
tE P
Displaying of measured temperature by floor sensor connected to receiver
(only with central unit product)
33
If "Err" is displayed, thermostat isn't associated to a received with floor sensor or
this sensor is damaged:
6
Er
C
°
tE P
.
Displaying of measured temperature by pipe sensor connected to connecting box
If "Err" is displayed, thermostat isn't associated to a received with pipe sensor or
34
this sensor is damaged:
Er
5
tE P
C
°
.
Calibration of pipe sensor
This menu is only displayed if pipe temperature is sent to thermostat by RF
communication.
35
Calibration must be done after a given order has been operating for a day. Place the
thermometer on the floor of the room. Record the temperature shown after 1 hour.
6
Enter the reading on your thermometer turning button
C
°
30
.
CAL1
The setting is validated with key
Displaying of logos
Important note:
➤ If user press
32
r
33
r
34
r
35
6
C
°
.
.
means than a calibration has been performed.
key during 3 seconds, sensor calibration is reset
won't be displayed on LCD screen.
(step of 0.1°C).
81
Publicité
