Publicité
c. Description of mode selection menu
Figure below shows navigation to access to different
modes and parameter menus when the product is
on (backlight is switched on):
Depending on system configuration, number of selectable working modes is different as presented in the table below:
System configuration
Classical
with "reversible mode"
with "basic navigation"
In details, the automatic mode selection after 10 seconds of user inactivity is specific:
➤ If current selected mode is
mode ;
➤ If current selected mode is holiday mode
mode
or
d. Working mode description
Pressing key has an action with respect of the key:
➤ Reset (key on the back of the device): permits to unlock the device, enter directly in pairing mode and to reset the device
with factory configuration;
permits to change set point temperature;
➤
permits to validate parameter modification or to change displayed temperature (set point or measure) and to save
➤
comfort temperature setpoint during derogation in AUTO mode;
permits to access: ❍ to menu of mode selection with a short press;
➤
permits to return directly to main menu without setting validation.
➤
Note: the reset key located on the back of the device permits to access to specific menus.
58
No user action
after 10 seconds
Automatic selection
of current mode
or
or
or timer/derogation
or
or
or
❍ to configuration selection menu with a long press (see § "Selection of configuration menu").
Working mode selection
Main menu with
selected mode
Working mode list
-
-
-
-
-
-
or
or
, automatic selection keeps current selected
, the thermostat returns automatically to the old
.
Main menu with
old working mode
-
-
-
-
-
-
-
-
GB
-
Publicité
