Publicité
GB
Holiday/Timer mode
Automatic
validation
In Holiday/timer, set point temperature is applied during a selected time.
a) Temperature set point setting: this value is set by turning button
Default value: 7°C - Value range: 5°C to 30°C
b) Return date setting: the next 3 steps permit to set month, day and hour of holiday ending.
-
bottom change parameter value /
c) Timer running: Menu logo starts to blink. Time and temperature values are displayed.
d) Timer end: When the counter is finished, thermostat returns to previous current mode.
From the main screen, by pressing
From the main screen, by pressing
displayed alternatively.
From any screen, by pressing
Set point setting
SEt
Month / year setting
ont
Day setting
dA
Hour setting
Hour
Timer running
18:30
10 seconds without
user action
Stand by
button validates parameter setting /
key, configuration selection menu is displayed.
button, measure temperature, set point temperature and humidity rate are
key, main menu is displayed without setting validation.
18
Main screen
0
C
°
without validation
.
10
22
Main screen
31
without validation
20
Main screen
31
without validation
15
Main screen
without validation
20
Main screen
8
C
°
without validation
.
Configuration
selection
. By pressing
button the value is validated.
returns to previous parameter.
Default value
Range
7°C
5°C to 30°C
61
Publicité
