Publicité
• In this case, do not tilt it more than absolutely nec-
essary and lift only the part which is away from the
operator. Always ensure that both hands are in the
operating position before returning the appliance to
the ground.
• Do not put hands or feet near or under rotating
parts.
• Never pick up or carry an appliance while the motor
is running.
• Pull the spark from the socket:
- whenever you leave the machine;
- before clearing a blockage;
- before checking, cleaning or working on the
appliance;
- after striking a foreign object. Inspect the appli-
ance for damage and make repairs as neces-
sary;
- if the appliance starts to vibrate abnormally
(check immediately).
4. Maintenance and storage
• Keep all nuts, bolts, and screws tight to be sure the
appliance is in safe working condition.
• Check the grass catcher frequently for wear or de-
terioration.
• Replace worn or damaged parts for safety.
• For rotary mowers, ensure that only replacement
cutting means of the right type are used.
- Never store the equipment with petrol in the
tank inside a building where fumes can reach an
open flame or spark;
- Allow the engine to cool before storing in any
enclosure;
- To reduce the fire hazard, keep the engine, si-
lencer, battery compartment and petrol storage
area free of grass, leaves, or excessive grease;
- If the fuel tank has to be drained, this should be
done outdoors.
Special satety warning
1. Grip the handles of the brush cutter firmly with
both hands. If you suspend the work, place the
throttle into the idling position.
2. Always be sure to maintain a steady, even posture
while working
3. Maintain the speed of the engine at the level re-
quired to perform cutting work and never raise the
speed of the engine above the necessary level.
4. If the grass gets caught in the blade during opera-
tion, or if you need to check the unit or refuel the
tank always be sure to turn off the engine.
5. If the blade touches a hard object like a stone im-
mediately stop the engine and check if something
is wrong with the blade. If so, replace the blade
with a new one.
6. If someone calls out while working, always be
sure to turn off the engine before turning around.
26 | GB
7. Never touch the spark plug or plug cord while the
engine is in operation. Doing so may result in be-
ing subjected to an electrical shock.
8. Never touch the muffler, spark plug or other me-
tallic parts of the engine while the
operation or immediately after shutting down the
engine. Doing so may result in serious burns.
9. When you finish cutting in one location and wish
to continue working in another spot, turn off the
engine and turn the machine to have the blade
facing away from
10. Check that the cutting attachment stopped turn-
ing under the engine idle before starting to use
the machine.
6. Technical data
Cutting circle diameter of line
mm
Cutting line diameter mm
Cutting line length m
Max. cutting speed max.
min
-1
Cutting circle diameter of
blade mm
Cutter balde thickness mm
Teeth quantity
Max. cutting speed max.
min-1
Displacement ccm
Max. engine output W
Fuel tank capicity l
Engine type
Weight kg
Subject to technical changes!
Information concerning noise emission measured ac-
cording to relevant standards:
Sound pressure L
Sound power L
Uncertainty K
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Vibration A
Uncertainty K
Reduce noise generation and vibration to a minimum!
• Use only equipment that is in perfect condition.
• Maintain and clean the equipment regularly.
• Adopt your way of working to the equipment.
• Do not overload the equipment.
• Have the equipment checked if necessary.
www.scheppach.com
your body.
Cutting data grass trimmer
Cutting data brush cutter
Power unit
2-stroke engine, air-
=
96.8 dB(A)
pA
=
114 dB(A)
wA
/
=
2.5 dB(A)
wA
pA
=
8.7 m/s
2
hv
= 1.5 m/s2
hv
engine is in
430
2 x 2.4
4
6400
255
1.4
3
7400
32.6
900
0.9
cooled
7.2
Publicité
