Publicité
5
REMOTE ENGINE START ECU MOUNTING
1. Locate the glove box inner cover. Using alcohol, clean
the back side of the glove box inner cover, as shown.
(FIGURE H)
2. Locate the remote engine start ECU. Remove the two
(2) release liners from the ECU double sided tape and
attach the remote engine start ECU to the glove box inner
cover, as shown. Ensure the ECU double sided tape
does not contact the character lines and is positioned
fl at against the bottom portion of the inner cover. Press
fi rmly in place for at least 30 seconds. (FIGURE I)
NOTE: Ensure the ECU connectors will be facing
downward when the inner cover is replaced.
3. Using one (1) of the supplied 39cm tie wraps, secure the
remote engine start ECU to the glove box inner cover.
Trim off the excess tie wrap. (FIGURE J)
ISSUE
PART NUMBER
H001SSL000
DATE
00
8 Jun 2023
FIGURE H
FIGURE I
FIGURE J
SUBARU OF AMERICA
Clean with
Alcohol
4 OF 11
Publicité
