Publicité
4
VEHICLE PREPARATION, continued
5. Using a panel removal tool, carefully remove the upper
vent panel by pulling rearward to disengage seventeen
(17) pressure clips. Move the panel in the direction of
the arrow to release the hook and remove the upper vent
panel. (FIGURE E)
6. Using a panel removal tool, carefully remove the upper
vent mounting panel by starting at the back of the lower
right corner to disengage fi ve (5) pressure clips. Pull
rearward to remove the upper vent mounting panel.
(FIGURE F)
7. Using a Phillips screwdriver, remove six (6) Phillips
screws securing the glove box inner cover. Disengage
the six (6) pressure clips and disconnect the glove box
lamp connector to remove the glove box inner cover.
(FIGURE G)
PART NUMBER
ISSUE
H001SSL000
DATE
00
8 Jun 2023
FIGURE E
FIGURE F
FIGURE G
SUBARU OF AMERICA
3 OF 11
Publicité
