Publicité
• Do not crush, drop or damage tool battery pack. Do not use a tool battery pack or charger that has received a sharp blow,
been dropped, run-over, or damaged in any way (e.g. pierced with a nail, hit with a hammer, stepped on).
• Do not disassemble. Incorrect reassembly may result in the risk of electric shock, fire or exposure to battery chemicals. If it is
damaged, take it to a Rupes service facility.
• Battery chemicals cause serious burns. Never allow contact with skin, eyes or mouth. If a damaged tool battery pack leaks
battery chemicals, use rubber or neoprene gloves to dispose of it. If skin is exposed to battery fluids, wash with soap and water
and rinse with vinegar. If eyes are exposed to battery chemicals, immediately flush with water for 20 minutes and seek medical
attention. Remove and dispose of contaminated clothing.
• Do not short circuit. A battery operated tool's battery pack will short circuit if a metal object makes a connection between the
positive and negative contacts on the tool's battery pack. Do not place a battery operated tool near anything that may cause a
short circuit, such as coins, keys or nails. A short circuited battery tool pack may cause fire and personal injury.
• Store your battery operated tool and charger in a cool, dry place. Do not store the tool's battery pack where temperatures
may exceed 50°C (120°F) such as in direct sunlight, a vehicle or metal building during the summer.
READ AND SAVE ALL INSTRUCTIONS FOR FUTURE REFERENCE
FUNCTIONAL DESCRIPTION
Part
1
2
3
CHARGER CONTROL PANEL
Overheating protection and
RED LED blinking: Battery damaged
and charging interrupted
8
Description
Recharging Seat
Charger control panel
Socket
GREEN LED blinking:
charging is paused
1
2
3
Specification
Function
Seat for tool recharging
Shows the charger status
Electric cord connection socket
GREEN LED on:
Charging completed or
standby
RED LED on:
Charging in progress
Publicité
