Publicité
TRANSMITTING
1 Select your desired band and frequency/channel.
2 Press and hold the microphone [PTT] switch and speak into the microphone to
transmit.
•
The
transmit band. The RF power meter shows the relative transmit output power.
•
The / /
have selected.
•
Speak into the microphone in your normal voice, while keeping the microphone
approximately 5 cm from your mouth. Speaking too close to the microphone or too
loudly may increase distortion and reduce intelligibility of your signal at the receiving
station.
3 When you fi nish speaking, release the [PTT] switch.
Note: When the transceiver overheats because of ambient high temperature or continuous
transmission, the protective circuit may function to lower transmit output power.
icon and the RF power meter appear on the display for the selected
icon(s) appear on the display, depending on what output power you
23
Publicité
