Publicité
• People who do not have the physical,
mental or sensory abilities to operate the
tool carefully and safety may not be per-
mitted to use it.
• Make sure to always wear personal pro-
tective clothing when operating (► Per-
sonal protective clothing – p. 21).
• Exercise caution and only work when in
good condition: If you are tired, ill, if you
have ingested alcohol, medication or ille-
gal drugs, do not use the device since you
are not in a condition to use it safely.
• Never mow when other people, particu-
larly children, or animals are in the vicinity.
• Remember that the operator or user is
responsible for accidents involving other
people or their property.
Maintenance
• Only those maintenance and fault elimi-
nation tasks described here may be car-
ried out. Any other tasks must be com-
pleted by a specialist.
• Check all screws regularly to ensure that
they sit tight.
• Only use original replacement parts. Only
these spare parts are designed and suita-
ble for the device. Other replacement
parts will not only lead to an invalidation of
the warranty, they may also endanger you
and your environment.
Storage and transportation
• Always store the device in a dry location.
• Protect the device from becoming dam-
aged prior to transport.
• Always carry the unit with the handle,
never grasp the cutting mechanism.
Tool-specific notes
• Before starting work check the area and
remove all objects which may damage the
cutting mechanism.
• Always ensure sufficient distance to the
cutting mechanism.
• Only use unit at walking speed.
• Only work with good light and visibility.
• The clothing of the operator should be
close-fitting. Avoid wearing loosely fitting
clothing. Wear sturdy footwear and long
work trousers.
• Ensure that no other people or animals
are located in the area you are working in.
• When changing direction on a slope, be
particularly careful.
• Always work at right angles to the slope.
• Pay attention when walking backwards.
Danger of stumbling!
Personal protective clothing
When working with the tool wear
sturdy footwear.
Your device at a glance
Note: The actual appearance of your
product may differ from the illustra-
tions.
► P. 3, fig. 1
1. Handle
2. Intermediate section
3. Lower handle section
4. Spindle lawnmower
5. Wheels
6. Bolts (used to adjust the height, on both
sides)
7. Bag for cuttings
8. Straps (for bag)
Scope of delivery
• Operating manual
• Spindle lawnmower
• Handle
• Intermediate section (2 pieces)
• Lower handle section
• Straps
• Bag for cuttings
• Stabilisation bar (for bag)
• Mounting bar (for bag)
• Bag containing small parts
• R Cotter pin (2×)
Assembly
Mounting the handle
► P. 3, fig. 2
– Connect the handle (1) and the intermedi-
ate sections (2) using the cross-headed
screws and toggle nuts and screw
together.
– Connect the lower handle section (3)
using the cross-headed screws and tog-
gle nuts to the intermediate sections (2)
and screw together.
► P. 3, fig. 3
– Press the lower sections of the handle
together and slot into the bolts (9).
– Secure lower handle section with R cotter
pins (10).
GB
21
Publicité
