Publicité
Attach Vesa Bracket To Monitor
1
Separate the VESA cover from the VESA bracket.
2
Position the VESA Bracket over the mounting holes
on the back of monitor with the D-shaped cutouts in
a vertical orientation. Attach using the 4 VESA screws
provided.
3
Snap the VESA cover back in place.
The VESA Bracket features 75mm and 100mm hole
patterns.
If you need to o set the Bracket from the monitor use the
provided
Extended VESA screws and Plastic Spacers. You may also
use the screws that came with your monitor.
Attach Monitor To Arm
1
Hold the monitor angled back and lower it onto the arm. Fit the hook at the top of the
arm into the corresponding cutout in the VESA Bracket.
2
Tilt the monitor back upright until the Quick Release Tab (B) on the arm snaps into position.
3
To remove the monitor, lift the Quick Release Tab and pull the bottom of the monitor away
from the arm, then lift free of the hook.
Large/curved monitors require adjusting the tension screw (A)
Clockwise until the monitor holds in position. (approx. 35 in-lbs.)
②
6
①
A
B
Publicité
