Publicité
Liens rapides
INSTALLATION INSTRUCTIONS
Contour Trims 4-Sided 748CTK
Approved for use with Valor models 738/739 ONLY
The Contour 4-Sided Trims 748CTK (black) is intended
to be used on any Valor G3 738 or 739 appliances fitted
with any inner front.
NOTE
The trim is lower than the appliance's bottom.
Allow enough space.
Installation
1. Slide the corner connection plates into the extruded
channels of the sides and top trim pieces. Butt the
mitered corners together. Fit the grub screws and
tighen while maintaining the fit of the miter. Repeat
with the other 3 corners.
Because our policy is one of constant development and improvement,
details may vary slightly from those given in this publication.
4000269-06
© Copyright Miles Industries Ltd., 2022
G3 Series
2. Attach the 2 trim mounting brackets to the side trim
pieces with 3 screws for each side. The brackets
should be flush to the bottom inside corner as
indicated.
3. Attach the complete trim unit to the firebox with 4
screws as shown.
Designed and Manufactured by / for Miles Industries Ltd.
190 – 2255 Dollarton Highway, North Vancouver, B.C.,
CANADA V7H 3B1
Tel. 604-984-3496 Fax 604-984-0246
www.valorfireplaces.com
Publicité
Manuels Connexes pour Valor G3 Serie
Sommaire des Matières pour Valor G3 Serie
- Page 1 The Contour 4-Sided Trims 748CTK (black) is intended to be used on any Valor G3 738 or 739 appliances fitted with any inner front. NOTE The trim is lower than the appliance’s bottom.
- Page 2 GUIDE D’INSTALLATION Série G3 Bordure à 4 côtés 748CTK Approuvée pour les foyers Valor 738/739 SEULEMENT 2. Fixez les supports de montage aux deux côtés de la bordure à l’aide de 3 vis par côté. Le bas des supports doit être aligné aux coins intérieurs de la bordure.