Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION INSTRUCTIONS
FenderFire Single Door Front 744FVI
Approved for use with Valor models 738/739 and
RF24B heaters fi tted with RA24ZC ONLY
DANGER
!
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and must be
installed for the protection of children and other at-risk
individuals.
The 744FVI FenderFire Single Door Front
is designed to be used along with an outer
surround trim (supplied separately).
The Single Door Front fits within the outer
surround trim and clips onto the standard
mounting brackets supplied with the 738/739
heaters or the RA24ZC Zero Clearance Kit.
The Single Door Front is compatible with all
outer surround trims and cast iron surrounds
available for use with the 738/739 heaters and
the RF24B heater fitted with the RA24ZC kit.
For the double door version of the FenderFire
front, refer to the 743FVI FenderFire install
instructions.
4000628-10
© Copyright Miles Industries Ltd., 2021
G3 Series
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
Clip-on window trim
Screen Door
(drop onto
hinge pins)
Overview (Heater and Outer Surround Trim sold separately)
INSTALLER: Leave this
manual with the appliance.
CONSUMER: Retain this
manual for future reference.
Note: This kit must be
installed or serviced by a
qualified installer, service
agency or gas supplier.
These instructions are to be
used in conjunction with the
main installation instructions
for the above listed heater
model.
(clips on appliance below
draft hood) (discard for
Outer Surround Trim
supplied separately
(drops into place)
Magnet
Mounting Brackets
supplied with
Clearance Kit
(clips onto brackets)
Publicité
Table des Matières
Manuels Connexes pour Valor G3 Serie
Sommaire des Matières pour Valor G3 Serie
- Page 1 INSTALLATION INSTRUCTIONS G3 Series FenderFire Single Door Front 744FVI Approved for use with Valor models 738/739 and RF24B heaters fi tted with RA24ZC ONLY DANGER INSTALLER: Leave this manual with the appliance. CONSUMER: Retain this HOT GLASS WILL manual for future reference.
-
Page 2: Important
738/739 Mantel Clearances RF24B Mantel Clearances Mantel width “A” 1” 2” 4” 6” 8” 10” 12” 14” Mantel width “A” 2” 4” 6” 8” 10” 12” Mantel height “B” 28” 29 ⅜” 32” 33 ½” 35” 36” 36 ½” 38” Mantel height “B”... -
Page 3: Repair Parts List
Repair Parts List 4. For 738/739/RF24B(ZC). Clip the FenderFire frame onto the brackets of the heater or ZC box within the outer surround. If the clips securing the FenderFire Extension Baffl e (not required with 4000622PH frame do not fully engage in the bracket, it may be RA24ZC applications) due to the bottom piece of the frame getting hung Clip-on Window Trim (not required with... - Page 4 GUIDE D’INSTALLATION Série G3 Porte simple FenderFire 744FVI Approuvée pour usage exclusif avec les foyers Valor 738/739 et le foyer RF24B installé avec le kit RA24ZC DANGER INSTALLATEUR : Laissez cette notice avec l’appareil. CONSOMMATEUR : Conservez cette notice pour consultation VITRE CHAUDE - RISQUE ultérieure.
-
Page 5: Dégagements-Manteau De Cheminée
Dégagements—Manteau de cheminée 738/739 RF24BN/P Profondeur “A” Profondeur “A” 1” 2” 4” 6” 8” 10” 12” 14” 2” 4” 6” 8” 10” 12” Hauteur “B” Hauteur “B” 28” 29 ⅜” 32” 33 ½” 35” 36” 36 ½” 38” 30” 32” 34” 36” 38” 40” Installation 1. -
Page 6: Liste De Pièces
Liste de pièces 4. Foyers 738, 739 et caisse RA24ZC. Accrochez le cadre de porte FenderFire sur ses supports à l’intérieur de la bordure extérieure. Si le cadre ne Défl ecteur d’extension 4000622PH s’accroche pas bien, il est possible que sa base (non requis avec le RA24ZC) touche une partie inégale de la base de foyer;...