Publicité
MS 125 EASY
TECHNICAL DATA
Article Number
Model
Rated
voltage and
frequency
Power
Speed
Pad Size
Weight
Sound emission values
Typically the A-weighted noise
levels of the product are:
Sound pres-
sure level
Sound power
level
Uncertainty K
Vibration total values a
tor sum) and uncertainty K
Vibration level max:
a
m/s
h
K
m/s
IDENTIFICATION
1. On/off switch
2. Handle
3. Vacum adapter
4. Base plate
INSTALLING HOOK AND LOOP SAND-
PAPER
1. Before installing sandpaper, make
sure the hook and loop fastener base
is free of dust and dirt and that the
sander is unplugged with the ON/OFF
41 529
MS 125 EASY
V
220-240
Hz
50/60
W
125
min
13.500
-1
mm
95x140
kg
dB(A)
dB(A)
dB
(triax vec-
h
4,37
2
1,5
2
switch in the off "O" position.
2. The base blade will hold any hook
and loop sandpaper without clamps
or glue. Simply line up the sandpaper
with the hook and loop fastener base
and press together, making sure front
edge of the sandpaper is aligned with
the front edge of the hook and loop
fastener base.
3. To remove used sandpaper, peel one
edge away from the hook and loop
fastener base until the whole sheet
is free.
CAUTION: Do not use torn or
severely worn or damaged sand-
1,1
paper. To do so could damage the
surface of the base plate.
OPERATION INSTRUCTIONS
1. Make sure that the power switch is in
the off-position, then plug in the tool.
2. Turn the switch to the ON position "I".
76
3. Do not use excess pressure while sand-
ing and always sand in same direction as
the grain of the wood. Let the sandpa-
84
per do the work. Apply even pressure
over the entire workpiece.
3
4. Check the wear on the sandpaper at
regular intervals and replace as neces-
sary.
NOTE: Always turn the switch OFF
and unplug the sander before chang-
ing sheets of sandpaper.
5. When sanding is competed, remove the
sander from the workpiece and turn off
the power switch.
6. When completely finished using the
sander, use a vacuum to dislodge all
sand shavings and dust, wipe with clean,
soft cloth.
7. To prevent accidents, turn off the sand-
er and unplug it after use. Clean, then
store the sander indoors out of chil-
dren's reach.
SELECTING THE SANDING SHEET
Depending on the material to be worked
and the required rate of material remov-
al, different sanding sheets are available:
English | 13
www.ffgroup-tools.com
Publicité
