Publicité
E N G L I S H
Switching on and off (fig. A)
• To run the tool, press the variable speed switch
(1). The pressure exerted on the variable speed
switch determines the tool speed.
• If necessary, press the lock-on button (2) for
continuous operation and release the switch.
The lock-on button works only in full speed,
forward rotation.
• To stop the tool, release the switch.
• To stop the tool in continuous operation,
press the switch briefly and release it.
Always switch off the tool when work is finished
and before unplugging.
• Always switch off the tool when work is finished
and before unplugging.
Thread tapping and mixing
The forward/reverse action enables the tool to be
used for thread tapping and mixing.
• Install the side handle.
• Select the required direction of rotation.
• Proceed as described above.
• Do not use this tool to mix or pump
easily combustible or explosive fluids
(benzine, alcohol, etc.).
• Do not mix or stir inflammable liquids
labelled accordingly.
Consult your dealer for further information on the
appropriate accessories.
Maintenance
Your D
WALT power tool has been designed to
E
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Lubrication
Your power tool requires no additional lubrication.
Cleaning
Keep the ventilation slots clear and regularly clean
the housing with a soft cloth.
20
Unwanted tools and the environment
Take your tool to an authorized D
agent where it will be disposed of in
anenvironmentally safe way.
WALT repair
E
Publicité
