Publicité
pressing the knob once. If you want to change the
automatic start time, only following the above steps 2-
3 again.
5.When the time is due, the ON/OFF indicator will
illuminate in red and the appliance starts brewing.
When the process is finished, if you do not want to
serve immediately, keep the coffee maker be
energized, the coffee can be kept warm on the
warming plate. And the appliance will shut off
automatically after 40 minutes from the ON/OFF
setting being activated if it has not been manually
disconnected at the completion of brewing. For an
optimum coffee taste, serve it just after brewing.
Note: During delay brewing process, the settings of
"HOUR" and "MINUTE" are invalid.
CLEANING AND MAINTENANCE
CAUTION: Be sure to unplug this appliance before
cleaning. To protect against electrical shock, do not
immerse cord, plug or unit in water or liquid. After each
use, always make sure plug is first removed from wall
outlet.
1. Clean all detachable parts after each use in hot
sudsy water.
2. Wipe the exterior surface of unit with a soft, damp
cloth to remove stains.
3. Water droplets may buildup in the above area of the
funnel and drip onto the product base during brewing.
To control the dripping, wipe off the area with a clean,
dry cloth after each use.
4. Use a damp cloth to gently wipe the thermal
insulation plate. Never use abrasive cleaner to clean
it.
5. Replace all parts and keep for next use.
REMOVING MINERAL DEPOSITS
To keep your coffee maker operating efficiently,
18
Publicité
