Publicité
6. Rotate the knob to set the current clock. Turn the
knob to the "HOUR" setting and then press the knob
once, one hour can be increased. And the "HOUR"
can be increased fast if hold and press the knob for
more than 1.5 seconds.
7. After setting the "HOUR", turn the knob to the "MIN"
setting and then press the knob once, one minute can
be increased. And the "MINUTE" can be increased
fast if hold and press the knob for more than 1.5
seconds.
8. After finish setting the current clock, press the knob
once to confirm, then the clock starts to run.
9. Rotate the knob to the "ON/OFF" setting, then press
the knob once, the ON/OFF indicator illuminates in red,
and the coffee maker starts to brew normal coffee. If
you want to brew thick coffee, turn the knob to the
"STRENGTH" setting, the "STRENGTH"
indicator
illuminates in orange, then turn the knob to the
"ON/OFF" setting and press the knob once, the
ON/OFF indicator will illuminate in red and the coffee
maker will brew thick coffee.
Note: To cancel the "STRENGTH" setting, turn the
knob to the "STRENGTH" setting and press the knob
once.
10. The brewing process can be interrupted by
pressing the knob again at any time, and the ON/OFF
indicator will extinguish, indicating your coffee maker
is shut off.
Note: You can take out carafe, pour and serve at any
time. The appliance will stop dripping automatically.
But the time cannot exceed 30 seconds.
11. Remove out carafe to serve when finish brewing
(about one minute later after the coffee stops dripping
out.)
Note: The coffee you get will less than the water you
have added, as some water is absorbed by coffee
ground and adhere to the plastic.
16
Publicité
