Publicité
CONTROL PANEL
LCD display
STRENGTH indicator
ON/OFF
indicator
Knob
BEFORE THE FIRST USE
Check that all accessories are complete and the unit
is not damaged. Fill water into water tank to the MAX
level and brew water for several times without coffee
powder, then discard the water. Clean and dry all
detachable parts thoroughly according to the section
"CLEANING AND MAINTENANCE" .
USING YOUR COFFEE MAKER
1. Open the top cover and fill the water tank with
drinking water. The water level should not exceed
MAX level as indicated on the water level gauge.
2. Place the funnel into the funnel support, make sure
it is assembled correctly, otherwise the top cover
cannot be closed. Place a filter or paper filter in the
funnel.
3. Add coffee powder into the filter. Usually a cup of
coffee needs a level spoon of coffee powder, but you
may adjust according to personal taste. Close the top
cover completely.
4. Insert the glass carafe with lid closed onto the
thermal insulation plate horizontally.
5. Plug the power cord into the outlet, the LCD display
indicates "12:00" and it blinks.
15
Publicité
