Télécharger
Partager
Imprimer la page
  1. Manuels
  2. Marques
  3. Lifetime Manuels
  4. Maisons de jardin
  5. 60467
  6. Instructions d'assemblage

Lifetime 60467 Instructions D'assemblage

Abri extérieur de 3,05 m x 2,44 m
Masquer les pouces

Publicité

Liens rapides

Télécharger ce manuel
10' x 8'
OUTSIDE SHED
MODEL 60467
BEFORE ASSEMBLY:
• Assemble on a level platform
• 3+ people for setup recommended
FOR DOMESTIC USE ONLY!
IMPORTANT: RETAIN FOR FUTURE REFERENCE. READ CAREFULLY.
TOOLS REQUIRED
(Not included—unless otherwise indicated*)
QUESTIONS?
Call: 1-800-225-3865
(English, French, Spanish)
CONTACT LIFETIME CUSTOMER SERVICE:
Live Chat:
www.lifetime.com/customerservice/home
(click on "LIVE CHAT" tab)
ASSEMBLY INSTRUCTIONS
Pour le français, voir la page 2. Para el español, ver la página 3.
ADC (x1)
ARA (x1) 1/8 in/po (≈3mm)
5/16" (≈8 mm) Wood drill bit
5/16" (≈8 mm) Masonry drill bit
For Customer Service in mainland
Europe and the United Kingdom:
E-mail: csinternational@lifetime.com
TABLE OF CONTENTS
Icon legend....................................4
Warnings & notices........................5
Platform construction...................6
Truss assembly...........................11
Gable assembly...........................20
Door assembly............................27
Floor assembly............................43
Wall assembly..............................48
Parts identifi er............................i-iv
Roof assembly............................62
Shelving installation....................89
Accessory installation.................94
Door alignment...........................96
Anchoring..........................100
Cleaning & care.........................103
Registration..........................104
Warranty..........................105
Model Number: 60467
Product ID:

Publicité

loading

Manuels Connexes pour Lifetime 60467

Sommaire des Matières pour Lifetime 60467

  • Page 1 5/16" (≈8 mm) Wood drill bit Cleaning & care......103 Registration......104 5/16" (≈8 mm) Masonry drill bit Warranty......105 QUESTIONS? Model Number: 60467 CONTACT LIFETIME CUSTOMER SERVICE: Product ID: Call: 1-800-225-3865 For Customer Service in mainland Live Chat: Europe and the United Kingdom: www.lifetime.com/customerservice/home...
  • Page 2 5/16 po (≈8 mm) Foret à maçonnerie Garantie.......106 N° de pièce : 604667 ® QUESTIONS ? CONTACTER AUX SERVICES À LA CLIENTÈLE LIFETIME Référence du produit : Pour les services à la clientèle du Composer le 1-800-225-3865 Entretien en direct: continent européen:...
  • Page 3 5/16 in (≈8 mm) Broca de albañilería Garantía........107 Número de pieza: 60467 ® ¿PREGUNTAS? PONERSE EN CONTACTO CON LOS SERVICIOS DE CLIENTES LIFETIME ID del producto: Chat en vivo: Llamar : 1-800-225-3865 Para el servicio a clientes en el www.lifetime.com/customerservice/home continente europeo: Correo electrónico:...
  • Page 4 ICON LEGEND / LÉGENDE DES ICÔNES / LEYENDA DE ÍCONOS • Indicates special heed should be taken when reading. • Indique qu’une attention spéciale doit être portée à la lecture. • Indica que uno debe prestar atención al leer. • Indicates the parts (or no parts) required for a section. •...
  • Page 5 WARNINGS & NOTICES / AVERTISSEMENTS ET AVIS / ADVERTENCIAS Y AVISOS English: • Failure to follow these warnings may result in serious injury or property damage and will void warranty. • To ensure safety, do not attempt to assemble this product without following the instructions carefully. •...
  • Page 6 PLATFORM CONSTRUCTION / CONSTRUCTION DE LA PLATE-FORME / CONSTRUCCIÓN DE LA PLATAFORMA • You must provide a platform on which to assemble your shed. Proper building permit documentation may be required in your neighborhood. Consult all local building codes prior to assembling the shed. Before beginning assembly, you must pour or construct a platform.
  • Page 7 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) CONCRETE REQUIRED / BÉTON REQUIS / CONCRETO REQUERIDO 1 yd (≈0,77 m CONCRETE PLATFORM / PLATE-FORME EN BÉTON / PLATAFORMA DE CONCRETO • The concrete should be approximately 4" (≈10,2 cm) thick. The actual dimensions of the shed, at its widest and longest points, are 96"...
  • Page 8 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) WOOD REQUIRED / BOIS REQUIS / MADERA REQUERIDA WOOD PLATFORM / PLATE-FORME EN BOIS / PLATAFORMA DE MADERA • All lumber must be rated for outdoor use! The actual dimensions of the shed, at its widest and longest points, are 96"...
  • Page 9 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS / INSTRUMENTAL Y PIEZAS REQUERIDOS 2 in/po x 4 in/po x 118 1/4 in/po (≈5,1 cm x ≈10,2 cm x ≈3,00 m) (x2) 2 in/po x 4 in/po x 90 1/2 in/po (≈5,1 cm x ≈10,2 cm x ≈2,30 m) (x9) 16d 3 1/2 in/po (16d x ≈8,89 cm) (x36) 1.2.1...
  • Page 10 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS / INSTRUMENTAL Y PIEZAS REQUERIDOS 22 1/4 in/po x 93 1/2 in/po x 3/4 in/po (≈10,2 cm x ≈2,38 m x ≈19,1 mm) (x1) 48 in/po x 93 1/2 in/po x 3/4 in/po (≈1,22 m x ≈2,38 m x ≈19,1 mm)(x2) 8d 2 1/2 in/po (8d ≈6,35 cm) (x66)
  • Page 11 TRUSS ASSEMBLY / ASSEMBLAGE DES FERMES / ENSAMBLAJE DE LAS CERCHAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Parts / Pièces / Piezas DTK (x14) ADY (x11) ADJ (6) DTJ (x1) ADK (x24) CXK (x2) AHT (x1) ADH (x3) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal parts / Pièces en métal / Piezas de metal AIP (x3)
  • Page 12 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) DTK (x8) ADK (x8) SIDE TRUSSES (x2) / FERMES LATÉRLES (x2) / CERCHAS LATERALES (x2) •...
  • Page 13 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) ADY (x8) ADK (x8) • Slide a truss brace (AFG) onto the truss gutter channels as shown. •...
  • Page 14 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (x2) (≈11 mm) ADH (x2) ADJ (x4) • Slide a truss rod (ADH) through the holes in the brace and connector. Secure with two cap nuts (ADJ). •...
  • Page 15 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (x2) (≈10 mm) DTK (x4) ADK (x4) CENTER TRUSS (x1) / CERCHA CENTRAL (x1) / FERME CENTRALE (x1) •...
  • Page 16 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) ADK (x2) ADY (x2) • Slide a truss brace (AFG) onto the truss gutter channels as shown. •...
  • Page 17 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) DTJ (x1) DTK (x2) ADK (x1) CXK (x2) 2.10 • Attach the vertical truss brace (DSN) to the truss. Only fi nger tighten this nut (ADK) for now. •...
  • Page 18 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (x2) (≈11 mm) ADH (x1) ADJ (x2) 2.12 • Slide a truss rod (ADH) through the holes in the brace and connector. Secure with two cap nuts (ADJ). •...
  • Page 19 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADK (x1) ADY (x1) AHT (x1) 2.13 • Only tighten the nut (ADK) by hand in this step. •...
  • Page 20 GABLE ASSEMBLY / ASSEMBLAGE DES PIGNONS / ENSAMBLAJE DE LAS FACHADAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Parts / Pièces / Piezas ADW (x10) EYR (x2) ENH (x2) AIQ (x2) EYQ (x2) ADZ (x6) ADV (x12)* *Two screws (ADV) will not be used in this assembly. ADK (x2) AEE (x14) CXK (x2)
  • Page 21 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x4) • Align the holes in the side gable panels (AGH & AGI). • Aligner les trous dans les panneaux de pignon latéraux (AGH & AGI). •...
  • Page 22 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADW (x5) AEE (x5) • Place the screen (AIQ) over the vent (ENH), and align the fi ve holes in the vent with those in the gable. •...
  • Page 23 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADV (x4) AHS (x2) • Insert an end cap (AHS) into each end of the header bar (BDD). •...
  • Page 24 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) CXK (x2) EYQ (x2) AEE (x2) ADZ (x2) • Align the holes in the left (EVZ) and right (EWA) entry gable halves. •...
  • Page 25 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS AEE (x5) ADW (x5) AHS (x2) • Repeat steps 3.3–3.4 for the entry gable. • Répéter les étapes 3.3 – 3.4 pour le pignon d’entrée. •...
  • Page 26 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) ADK (x2) ADV (x6) EYR (x2) AEE (x2) 3.11 • Align the holes in the header with those in the entry gable. •...
  • Page 27 LEFT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE GAUCHE / ENSAMBLE DE LA PUERTA IZQUIERDA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO BYZ (x4) AEE (x6) AAB (x4) ADW (x2) ACH (x4) ARA (x2) 1/8 in/po (≈3 mm) ENO (x8) Parts / Pièces / Piezas...
  • Page 28 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) / SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS BBH (x1) • Slide a long tube (EDW) into the hole in the left door (BDJ) until a few inches remain out of the Door. The end with the hole goes at the top.
  • Page 29 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) / SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ARA (x1) 1/8 in/po (≈3 mm) ACH (x2) AAB (x2) AEB (x2) • Attach the left latch bracket (EOY) to the door using the hardware included. Do not overtighten. •...
  • Page 30 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) / SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ENO (x4) ENP (x2) • Attach the locks (DGS & DGR) and spacers (ENP) to the top and bottom of the left door. If the pins in the locks do not move freely, loosen the screws (ENO) just a little.
  • Page 31 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) / SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS BYZ (x2) ADW (x1) AEE (x3) • Secure the handle to the door using the hardware included. •...
  • Page 32 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) / SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS • There is a narrow groove (illustrated in black) running along the outside of the window on the back of each door. Starting at the top, left corner of the groove in the left door, lay the 1/8"...
  • Page 33 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) / SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x14) 4.10 • Peel off the protective plastic from both sides of the window pane (AHE). Align the holes in the pane with those in the door, and gently set a window pane (DHN) down onto the door.
  • Page 34 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) / SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS BYZ (x2) AEE (x3) AAB (x2) ACH (x2) ARA (x1) ENO (x4) ADW (x1) 1/8 in/po AEB (x2) (≈3 mm) ADZ (x14)
  • Page 35 RIGHT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE DROITE / ENSAMBLE DE LA PUERTA DERECHA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Metal parts / Pièces en métal Piezas de metal BYZ (x4) ACH (x4) BBI (x2) EPA (x2) BBH (x2) CXK (x4) CHK (x2)
  • Page 36 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) / SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS CHK (x1) • Slide a long tube (EDW) into the hole in the right door (BDK) until a few inches remain out of the door. The end with the hole goes at the top.
  • Page 37 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) / SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (≈11 mm) 3/8 in/po (≈10 mm) EPC (x2) AEE (x2) CXK (x2) ACH (x2) AAB (x2) AEB (x2) •...
  • Page 38 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) / SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS BYZ (x2) ADW (x1) AEE (x1) • Attach the handle as indicated. Tighten securely. • Bien attacher la poignée comme indiqué. Bien serrer la quincaillerie. •...
  • Page 39 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) / SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS • Slide a hinge tube (CRD) into the hole in the door until a few inches remain out of the bottom. •...
  • Page 40 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) / SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS • There is a narrow groove (illustrated in black) running along the outside of the window on the back of each door. Starting at the top, right corner of the groove in the right door, lay the 1/8"...
  • Page 41 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) / SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x14) • Peel off the protective plastic from both sides of the window pane (AHE). Align the holes in the pane with those in the door, and gently set a window pane (DHN) down onto the door.
  • Page 42 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) / SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (≈11 mm) CHK (x1) AEE (x3) ACH (x2) AAB (x2) 3/8 in/po AEB (x2) (≈10 mm) EPC (x2) CXK (x2)
  • Page 43 FLOOR ASSEMBLY / ASSEMBLAGE DU PLANCHER / ENSAMBLAJE DEL PISO HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Parts / Pièces Piezas CWU (x34)* ADC (x1) AHL (x2) AHO (x4) • These screws do not anchor the fl oor; they only hold the panels together. •...
  • Page 44 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) / SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS • Unfold the fl oor panels before installing. • Dépliez les panneaux de sol avant l’installation. •...
  • Page 45 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) / SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS • Repeat the previous step. • Répétez l’étape précédente. • Repita el paso anterior. Hole / Trou / Agujero •...
  • Page 46 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) / SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS or, ou, o ADC (x1) CWU (x18) AHO (x2) • Decide on which edge you would like to install your doors. Insert bushings (AHO) through the holes in the fl oor. •...
  • Page 47 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) / SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS or, ou, o ADC (x1) CWU (x4) • Attach the strike plates (AHL) to the fl oor on the same side the bushings were installed. •...
  • Page 48 WALL ASSEMBLY / ASSEMBLAGE DES MURS / ENSAMBLAJE DE LOS MUROS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO * Not all hardware will be used in the section. * La quincaillerie n’est pas utilisée au complet dans la section. * No se utilizará...
  • Page 49 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) / SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x20) • Secure a wall support channel (AFM) at the middle of the notch on fi ve (5) wall panels (AHD) using four (4) screws (ADZ) for each. •...
  • Page 50 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) / SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) • Secure a wall support channel (AFM) to the corner wall panel (AGY) using four (4) screws (ADZ). The end with two holes goes at the bottom. •...
  • Page 51 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) / SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8 • Secure a wall support channel (AFM) to the corner wall panel (AGL) using four (4) screws (ADZ). The end with two holes goes at the top. •...
  • Page 52 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) / SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS • There is a narrow groove (illustrated in black) running along the outside of the window on the back of each narrow window wall panel (BDH &...
  • Page 53 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) / SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x28) • Peel off the protective backing from both sides of window pane (BDV). Align the holes in the pane with those in the panel, and gently set a window pane down onto the panel.
  • Page 54 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) / SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) • Insert a wall channel (AFM) into the fi rst groove on the back of the right window wall panel (BDI) as shown. Secure with four (4) screws (ADZ).
  • Page 55 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 1 / CONTENU DE LA BOÎTE 1 / CONTENIDO DE LA CAJA 1 BDJ (x1) BDK (x1) BDC (x1) AGQ (x4) CUW (x2) HLF (x4) CUD (x2) BDR (x1) BDS (x1) DRA (x1)
  • Page 56 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS METAL PARTS KIT 1 / KIT PIÈCES EN MÉTAL 1 / KIT DE PIEZAS DE METAL 1 AFG (x2) 67 3/4 in/po (≈1,72 m) AFM (x3) 46 in/po (≈1,17 m) 25 7/8 in/po (≈65,7 cm) BDD (x1) DSM (x1)
  • Page 57 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS METAL PARTS KIT 2 (CONTINUED) / KIT PIÈCES EN MÉTAL 2 (SUITE) / KIT DE PIEZAS DE METAL 2 (CONTINUACIÓN) 77 in/po (195,5 cm) CRD (x2) 59 1/2 in/po (≈1,51 m) EYS (x1) CONTENTS OF BOX 2 / CONTENU DE LA BOÎTE 2 / CONTENIDO DE LA CAJA 2 BDH (x1)
  • Page 58 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 2 (CONTINUED) / CONTENU DE LA BOÎTE 2 (SUITE) / CONTENIDO DE LA CAJA 2 (CONTINUACIÓN) METAL PARTS KIT 2 (CONTINUED) / KIT PIÈCES EN MÉTAL 2 (SUITE) / KIT DE PIEZAS DE METAL 2 (CONTINUACIÓN) CONTENTS OF SMALL PARTS KIT / CONTENU DU KIT PETITES PIÈCES / CONTENIDO DEL KIT DE PIEZAS PEQUEÑAS AFL (x6) 8 7/16 in/po (≈21,4 cm)
  • Page 59 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) / SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS • You may install the side doors on either end; however, you will need to install the corner panels (AGN & ANY) on the same end as you do the doors. •...
  • Page 60 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) / SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 7.11 • Slide the panel to the left. • Faire glisser le panneau à gauche. •...
  • Page 61 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) / SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 7.12 • Insert tabs at the bottom of the corner panel (AGW) into the fi rst two slots along the right edge of the fl...
  • Page 62 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) / SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x15) 7.14 • Secure the two panels using fi ve (5) screws (ADZ). The attachment points may have a thin membrane that the screws will puncture.
  • Page 63 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) / SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x20) 7.16 • For the right, rear corner panel (AGL), repeat the step done for the right, front corner panel. •...
  • Page 64 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) / SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x5) 7.18 • For the left, rear corner panel (AGN), repeat the step you did for the right, front corner panel. •...
  • Page 65 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) / SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x5) 7.20 • Insert tabs at the bottom of the left window wall panel (BDH) into the third and fourth slots from the front, right corner of the fl...
  • Page 66 ROOF ASSEMBLY / ASSEMBLAGE DU TOIT / ENSAMBLAJE DEL TEJADO HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO DTV (x2) AHP (x4) ADZ (x200)* Parts / Pièces / Piezas ARV (x4) AIC (x1) CXK (x2) AEE (x2) AXX (x2) * Not all hardware will be used in the section. * La quincaillerie n’est pas utilisée au complet dans la section.
  • Page 67 ROOF ASSEMBLY / ASSEMBLAGE DU TOIT / ENSAMBLAJE DEL TEJADO PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic parts / Pièces en plastique / Piezas de plástico HOC (x2) HOB (x3) DRB (x1) Previously assembled parts / Pièces déjà assemblées / Piezas previamente ensambladas (x1) (x1) (x1)
  • Page 68 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDO ADZ (x14) • Set a side gable down onto the right side of the shed. •...
  • Page 69 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDO • Place a side truss into the notches on the rear wall panel and right front window wall panel.
  • Page 70 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDO ADZ (x4) • Set the roof panel (AGQ) down onto the wall panel, gable, and truss. The groove at the bottom of the roof panel sets over the top of the wall panel.
  • Page 71 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDO ADZ (x5) • Insert the fi rst three screws (ADZ) through the gable and into the roof panel, and the next two screws (ADZ) through the truss and into the roof panel at the locations shown.
  • Page 72 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDO ADZ (x13) • Insert one screw (ADZ) through the gable and into the roof panel and one screw (ADZ) through the truss and into the roof panel at the locations shown.
  • Page 73 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDO AHP (x1) • Pull the hinge tube down out of the left door about six inches. Align the hole at the bottom of the hinge tube with the slit in the bushing, and insert the tube.
  • Page 74 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDO AHP (x1) ADZ (x6) 8.10 CRD (long / longs / largos • Repeat this step for the right door. •...
  • Page 75 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDO ADZ (x22) 8.12 • Repeat steps 8.1–8.8 for the left side of the shed. • Répéter les étapes 8.1 – 8.8 pour le côté droit de l’abri. •...
  • Page 76 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDO 3/8 in/po DTV (x2) (≈10 mm) CXK (x2) AEE (x2) 8.11 • Secure the ends of the support tube to the side truss channels using the hardware provided. •...
  • Page 77 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDO ADZ (x20) 8.12 • Attach the two center, rear roof panels using only one roof support per panel. •...
  • Page 78 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDO AHP (x2) 8.13 • Pull the hinge tube down out of the left door about six inches. Align the hole at the bottom of the hinge tube with the slit in the bushing, and insert the tube.
  • Page 79 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDO 3/8 in/po (≈10 mm) ADZ (x1) 8.13 • Slide the holes in the entry gable down over the two hinge tubes. The ends of the gable go in the trusses. •...
  • Page 80 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDO AEE (x4) BZA (x2) ADK (x2) ECR (x1) ECS (x1) 8.15 • Insert the right drainage plate (ECS) into the right lateral truss, and align the notch in the plate with the fi rst hole in the truss as shown.
  • Page 81 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDO ADZ (x12) 8.16 • Fold the ends of the large angled roof panel (DRA), and set it down onto the shed as shown. Secure the panel to the entry gable and center truss with twelve (12) screws (ADZ) at the locations shown.
  • Page 82 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDO 3/8 in/po (≈10 mm) ADZ (x2) 8.17 • Secure the drainage plates from step 8.16 to the roof at the location shown. Tighten the nut on the drainage plate now.
  • Page 83 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDO ADZ (x2) 8.18 • An adult must apply a downward pressure on panel (DRB) during the insertion of the screws (ADZ). •...
  • Page 84 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDO ADZ (x18) 8.19 • An adult must apply a downward pressure on panels (BDS & BDR) during the insertion of the screws (ADZ). •...
  • Page 85 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDO 8.20 • Bend the skylights (HLF) slighty before installing them. The fi rst skylight will fi t in the upper edge of the end cap (HOC). Place a connector (HOB) on the other end of the skylight, fi...
  • Page 86 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDO ARV (x2) 8.21 • Place the skylight onto the end of the roof. Fit the end cap over the gable. The end of the connector will extend to the truss.
  • Page 87 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDO ADZ (x2) 8.23 • Secure the skylight with the hardware indicated in the location shown. Do not use any other hardware until all the skylights are in place.
  • Page 88 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDO 8.25 • Place the second skylight into the upper section of the connector. • Mettre le deuxième puits de lumière dedans la section supérieure du connecteur. •...
  • Page 89 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDO 8.27 • Repeat step 8.25 & 8.26 to add the third skylight and connector. • Répéter l’étape 8.25 & 8.26 pour ajouter le troisième puits de lumière et connecteur. •...
  • Page 90 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDO ARV (x2) 8.29 • Place the end cap and skylight onto the end of the roof. Fit the end cap over the gable. The end of the skylight will extend slightly past the truss.
  • Page 91 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDO ADZ (x22) 8.31 • Attach the skylights to the roof panels with the hardware indicated. •...
  • Page 92 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDO ADX (x4) AIM (x1) AIC (x1) 8.32 • Attach the left (AIC) and right (AIM) gap fl aps to the corners of the doors using the hardware included. These fl aps simply serve to block out light.
  • Page 93 SHELVING INSTALLATION / INSTALLATION DU RAYONNAGE / INSTALACIÓN DE LA ESTANTERÍA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO FEX (x8) ADZ (x32)* GJZ (x8) * Not all hardware will be used in the section. AIY (x4) * La quincaillerie n’est pas utilisée au complet dans la section. * No se utilizará...
  • Page 94 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS AIY (x2) FEX (x4) • Insert the shelf brackets (AIY) into the slots in the wall/shelf support channels. The brackets must be at the same height. •...
  • Page 95 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS GJZ (x4) • Attach a shelf support bracket (HDV) into the side wall at the same level the shelf brackets were placed. Repeat for the other shelf support bracket on the opposite side.
  • Page 96 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) • Attach the shelf (AFV) to the corner wall panels and shelf support brackets using eight (8) screws (ADZ). •...
  • Page 97 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS AIY (x2) FEX (x4) GJZ (x4) ADZ (x8) • Repeat steps 8.1–8.6 to install the second shelf on the same wall. •...
  • Page 98 ACCESSORY INSTALLATION / INSTALLATION DES ACCESSOIRES / INSTALACIÓN DES ACCESORIOS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO EDL (x6) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO (Not included—unless indicated otherwise*) / (Non inclus — sauf indication contraire*) / (No incluido, salvo indicación contraria*) 94 94...
  • Page 99 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS EDL (x6) 10.2 • Insert the six (6) wall hooks (EDL) into any of the notches in the wall panels (along the rear Wall). Then push downward to lock them in place.
  • Page 100 DOOR ALIGNMENT / ALIGNEMENT DES PORTES / ALINEACIÓN DE LAS PUERTAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic parts / Pièces en plastique / Piezas de plástico AIX (x4) TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO (Not included—unless indicated otherwise*) / (Non inclus —...
  • Page 101 SECTION 11 (CONTINUED) / SECTION 11 (SUITE) / SECCIÓN 11 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 11.1 • If the doors are not level, follow the steps on this page or the next to even them out. •...
  • Page 102 SECTION 11 (CONTINUED) / SECTION 11 (SUITE) / SECCIÓN 11 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 11.1.1 • If the right door is higher, insert a shim (AIX) underneath the fl oor underneath the left door and the right, rear corner of the shed until the doors are the same height.
  • Page 103 SECTION 11 (CONTINUED) / SECTION 11 (SUITE) / SECCIÓN 11 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (≈11 mm) 11.2 • Once the doors are the same height, have one adult with the tools stand inside the shed. Close the doors and lock them.
  • Page 104 SHED ANCHORING / ANCRAGE DE L’ABRI / ANCLAJE DE LA CASETA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO (Not included—unless indicated otherwise*) / (Non inclus — sauf indication contraire*) / (No incluido, salvo indicación contraria*) 5/16 in/po (≈8 mm) Wood Drill Bit 5/16 in/po (≈8 mm) Broca para madera 5/16 in/po (≈8 mm) Foret à...
  • Page 105 SECTION 12 (CONTINUED) / SECTION 12 (SUITE) / SECCIÓN 12 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 5/16 in/po (≈8 mm) 12.1 • To anchor your shed, you must purchase the correct anchoring hardware. For a concrete platform, we recommend using a hammer drill, 5/16"...
  • Page 106 SECTION 12 (CONTINUED) / SECTION 12 (SUITE) / SECCIÓN 12 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 5/16 in/po (≈8 mm) 12.1 • To anchor your shed, you must purchase the correct anchoring hardware. For a wood-framed platform, we recommend using a drill, 5/16"...
  • Page 107 ® product purchase. By following the instructions below, your new Lifetime product should provide you with years of service and enjoyment. The polyethylene panels are stain and solvent resistant. Most stains can be removed using a mild soap and a soft-bristled brush.
  • Page 108 à des tiers, et ne leur permettra pas d’utiliser vos données personnelles à leurs propres fi ns. Nous vous invitons à lire notre politique de confi dentialité à www.lifetime.com (en anglais seulement) ENREGISTRER CE PRODUIT aujourd’hui! REGISTRAR EL PRODUCTO EN LÍNEA EN WWW.LIFETIME.COM...
  • Page 109 This warranty is nontransferable and is expressly limited to the repair or replacement of defective products. If the product is defective within the terms of this warranty, Lifetime Products, Inc. will repair or replace defective parts at no cost to the purchaser.
  • Page 110 La présente garantie remplace expressément toute autre garantie, expresse ou implicite, y compris les garanties de qualité marchande ou d’adaptation à un usage particulier dans la mesure permise par les lois du pays ou de l’État. Ni Lifetime Products, Inc. ni aucun de ses représentants n’assument une quelconque responsabilité en lien avec ce produit. Cette garantie vous donne des droits juridiques précis et vous pourriez également avoir d’autres droits selon l’État ou la province.
  • Page 111 NO ESTÁN DISPONIBLES O SON OBSOLETAS. El comprador original recibe una garantía de que los productos de césped y jardín de Lifetime están libres de defectos de material o mano de obra durante un período de 10 años a partir de la fecha de compra original al por menor. La palabra “defectos” se defi...
  • Page 112 Pour acheter des accessoires ou des autres produits Lifetime , visiter le : www.lifetime.com Ou composer le 1-800-424-3865 ® MEJORAR LA COMPRA DE LIFETIME AGREGANDO ACCESORIOS U OTROS MARAVILLOSOS PRODUCTOS Para comprar accesorios u otros productos de Lifetime®, visitarnos en: www.lifetime.com O marcar al 1-800-424-3865 www.lifetime.com 1236653 6/13/2024...