Télécharger Imprimer la page

Publicité

Liens rapides

OUTDOOR
STORAGE SHED
MODEL 60334
ITM./ART. 1902292
BEFORE ASSEMBLY:
• Assemble on a level platform
• At least 3 adults recommended for setup
• Inspect all parts and hardware. Ensure all are included using
the Parts Identifier in the middle of these instructions. The
Parts Identifier , in yellow, can be removed from the instructions
for quick reference
ADDITIONAL ASSEMBLY HELP
FOR DOMESTIC USE ONLY!
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
TOOLS REQUIRED (NOT INCLUDED—UNLESS INDICATED OTHERWISE)
QUESTIONS?
Call: 1-800-225-3865
7:00 am–5:00 pm (Monday–Friday) MST
and 9:00 am–1:00 pm Saturday MST
(English, French, Spanish)
For assembly help, scan:
CONTACT LIFETIME CUSTOMER SERVICE:
Live Chat: www.lifetime.com/customerservice
(click on "LIVE CHAT" tab)
For Customer Service in mainland Europe:
E-mail: cs@lifetimeproducts.eu
ASSEMBLY INSTRUCTIONS
Pour le français, voir la page 2. Para el español, ver la página 3.
or search
1214507
in the BILT app.
5/16 in (≈8 mm) Wood Drill Bit
5/16 in (≈8 mm) Masonry Drill Bit
MODEL# AND PRODUCT ID
Model Number: 60334
Product ID:
TABLE OF CONTENTS
Icon Legend..................................................4
Warnings & Notices......................................5
Platform Construction..................................6
Truss Assembly...........................................11
Gable Assembly..........................................21
Door Assembly............................................26
Floor Assembly............................................39
Wall Assembly.............................................44
Parts Identifi er............................................50
Shelving Installation...................................59
Roof Assembly.............................................62
Wall Hook Installation.................................81
Snow Load Kit Installation.........................83
Door Alignment...........................................89
Anchoring...............................................92
Cleaning & Care.........................................98
Registration..............................................99
Warranty...................................................100
(both are needed when contacting us)

Publicité

loading

Sommaire des Matières pour Lifetime 60334

  • Page 1 Anchoring..........92 5/16 in (≈8 mm) Masonry Drill Bit Cleaning & Care.........98 Registration..........99 Warranty...........100 QUESTIONS? CONTACT LIFETIME CUSTOMER SERVICE: Live Chat: www.lifetime.com/customerservice Call: 1-800-225-3865 MODEL# AND PRODUCT ID (both are needed when contacting us) Model Number: 60334 (click on “LIVE CHAT” tab) 7:00 am–5:00 pm (Monday–Friday) MST...
  • Page 2 Nettoyage et entretien........98 Enregistrement........99 Garantie............101 ® QUESTIONS ? CONTACTER LES SERVICES À LA CLIENTÈLE LIFETIME Composer le 1-800-225-3865 N° DE MODÈLE ET RÉFÉRENCE DU PRODUIT Chat en direct: www.lifetime.com/customerservice (Il faut avoir les deux au moment de nous contacter) Du lundi au vendredi 7 h – 17 h (HNR) (cliquer sur la languette «...
  • Page 3 5/16 in. (≈8 mm) Broca de albañilería Registro.............99 Garantía............102 ® ¿PREGUNTAS? PONERSE EN CONTACTO CON LOS SERVICIOS DE CLIENTES LIFETIME Chat en vivo: www.lifetime.com/customerservice MODEL E ID DEL PRODUCTO Marcar : 1-800-225-3865 (se necesitan los dos al contactarnos) Número de modelo: 60334 (cliquear en la lengüeta «LIVE CHAT»)
  • Page 4 ICON LEGEND / LÉGENDE DES ICÔNES / SIGNIFICADO DE LOS ÍCONOS • Indicates special heed should be taken when reading. • Indique qu’une attention spéciale doit être portée à la lecture. • Indica que uno debe prestar atención al leer. •...
  • Page 5 WARNINGS & NOTICES / AVERTISSEMENTS ET AVIS / ADVERTENCIAS Y AVISOS English: • Failure to follow these warnings may result in serious injury or property damage and will void warranty. • To ensure safety, do not attempt to assemble this product without following the instructions carefully. •...
  • Page 6 PLATFORM CONSTRUCTION (MATERIALS NOT INCLUDED) / CONSTRUCTION DE LA PLATE-FORME (LES PIÈCES NE SONT PAS INCLUSES) / CONSTRUCCIÓN DE LA PLATAFORMA (LOS MATERIALES NO SON INCLUIDOS) • You must provide a platform on which to assemble your shed. Proper building permit documentation may be required in your neighborhood.
  • Page 7 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) CONCRETE REQUIRED / BÉTON REQUIS CONCRETO REQUERIDO 1 yd (0,77 m CONCRETE PLATFORM / PLATE-FORME EN BÉTON PLATAFORMA DE CONCRETO • The concrete should be approximately 4 in (≈10,2 cm) thick. The actual dimensions of the shed, at its widest and longest points, are 95.7"...
  • Page 8 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) WOOD REQUIRED / BOIS REQUIS MADERA REQUERIDA WOOD PLATFORM / PLATE-FORME EN BOIS PLATAFORMA DE MADERA • All lumber must be rated for outdoor use! The actual dimensions of the shed, at its widest and longest points, are 95.7"...
  • Page 9 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y PIEZAS REQUERIDOS 2 in/po x 4 in/po x 118 in/po (≈5 cm x 10 cm x 299,7 cm) (x2) 2 in/po x 4 in/po x 91 in/po (≈5 cm x 10 cm x 231,2 cm) (x9) 16d 3 in/po (16d x ≈7,6 cm) (x36) 1.2.1...
  • Page 10 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y PIEZAS REQUERIDOS 22 in/po x 94 in/po x 0.75 in/po (≈55,9 cm x 238,8 cm x 19,1 mm) (x1) 48 in/po x 94 in/po x 0.75 in/po (≈121,9 cm x 238,8 cm x 19,1 mm) (x2) 8d 1 1/2 in/po (8d ≈3,81 cm) (x66)
  • Page 11 TRUSS ASSEMBLY / ASSEMBLAGE DES FERMES / ENSAMBLAJE DE LAS CERCHAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac quincaillerie Bolsa de herraje CXK (x2) DTK (x14) ADY (x11) ADJ (6) ADK (x24) AHT (x1) DTJ (x1) 11 9/16 in/po (≈29,4 cm) ADH (x3) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS...
  • Page 12 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • There are two types of Long Gutter Channels: DSQ and DSR. One end of Channel DSQ is notched. Channel DSR has no notches at either end. This is important to know when assembling the two side trusses;...
  • Page 13 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) ADK (x8) DTK (x8) SIDE TRUSSES (x2) / FERMES LATÉRLES (x2) CERCHAS LATERALES (x2) •...
  • Page 14 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) ADY (x8) ADK (x8) • Slide a Truss Brace (AFG) onto the Truss Gutter Channels as shown. •...
  • Page 15 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (x2) (≈11 mm) (x2) ADJ (x4) 11 9/16 in/po (≈29,4 cm) ADH (x2) • Slide a Truss Rod (ADH) through the holes in the Large Truss Brace, Small Truss Brace (BRD), and Connector. Secure with two Cap Nuts (ADJ).
  • Page 16 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (x2) (≈10 mm) (x2) DTK (x4) ADK (x4) CENTER TRUSS (x1) / CERCHA CENTRAL (x1) FERME CENTRALE (x1) •...
  • Page 17 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) ADY (x2) ADK (x2) • Slide a Truss Brace (AFG) onto the Truss Gutter Channels as shown. •...
  • Page 18 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) DTK (x2) ADK (x1) DTJ (x1) CXK (x2) 2.10 • Attach the Vertical Truss Brace (DSN) to the Truss. Only fi nger tighten this Nut (ADK) for now. •...
  • Page 19 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (x2) (≈11 mm) (x2) ADJ (x2) 11 9/16 in/po (≈29,4 cm) ADH (x1) 2.12 • Slide a Truss Rod (ADH) through the holes in the Large Truss Brace, Small Truss Brace (BRD), and Connector. Secure with two Cap Nuts (ADJ).
  • Page 20 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) ADK (x1) ADY (x1) AHT (x1) 2.13 • Only tighten the Nut (ADK) by hand in this step. •...
  • Page 21 GABLE ASSEMBLY / ASSEMBLAGE DES PIGNONS / ENSAMBLAJE DE LAS FACHADAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bags / Sacs de quincaillerie Bolsas de herraje ADW (x10) ADZ (x12) AEE (x12) ENH (x2) AIQ (x2) ADV (x16) AHS (x6) ADK (x2) EYQ (x1)
  • Page 22 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) • Align the holes in the side gable halves (AGH and AGI). • Aligner les trous dans les pignons latéraux (AGH et AGI). •...
  • Page 23 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 10 mm ADW (x10) AEE (x10) AHS (x4) ADV (x12) • Insert an end cap (AHS) into each end of the square •...
  • Page 24 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 10 mm EYQ (x1) ADZ (x3) CXK (x1) AHS (x2) • Align the holes in the left (FTM) and right (FTN) rear •...
  • Page 25 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 10 mm EYR (x2) ADV (x4) ADK (x2) AEE (x2) 3.11 • Align the holes in the header with those in the entry gable. •...
  • Page 26 LEFT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE GAUCHE / ENSAMBLAJE DE LA PUERTA IZQUIERDA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ADJ (x2) AEE (x3) ADW (x1) AEB (x2) BYZ (x2) AHM (x2) ACH (x2)
  • Page 27 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Slide a Hinge Tube (CRE) down into the hole at the top of the Left Door (BDJ). •...
  • Page 28 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AHM (x2) • Door Channels (BLH) are specifi cally designed to bow. This ensures a tight fi t when they are closed and latched, making your shed more secure.
  • Page 29 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS BYZ (x2) ADW (x1) BYR (x1) BYS (x1) AEE (x3) • Note: The Deadbolts are used for locking the door. They may not •...
  • Page 30 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (11 mm) ACH (x2) ADJ (x2) ECY (x1) AEB (x2) ECX (x1) • Attach the Strike Plate (ECX) and Lock Bracket (ECY) to the Channel as shown. Only hand-tighten the hardware for now. •...
  • Page 31 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS EPH (x1) • There is a narrow groove (illustrated in black) running along the outside of the window on the back of each Door. Starting at the top, left corner of the groove in the Left Door, lay the 1/8”...
  • Page 32 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x28) • Peel off the protective backing from both sides of Window Pane (DHN). Align the holes in the Pane with those in the Door, and gently set a Window Pane down onto the Door.
  • Page 33 RIGHT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE DROITE / ENSAMBLE DE LA PUERTA DERECHA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ADW (x1) AEE (x3) BYS (x1) BYR (x1) BBI (x1) ACH (x2) ECW (x1)
  • Page 34 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Slide a Hinge Tube (CRE) down into the hole at the top of the Right Door (BDK). •...
  • Page 35 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS BYR (x1) BYS (x1) • Door Channels (BLH) are specifi cally designed to bow. This ensures a tight fi t when they are closed and latched, making your shed more secure.
  • Page 36 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (≈11 mm) BBI (x1) BYZ (x2) ADW (x1) AEE (x1) AEB (x2) ADJ (x2) ACH (x2) EOZ (x1) ECW (x1) ECZ (x1)
  • Page 37 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS EPH (x1) • There is a narrow groove (illustrated in black) running along the outside of the window on the back of each Door. Starting at the top, right corner of the groove in the Right Door, lay the 1/8"...
  • Page 38 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x28) • Peel off the protective backing from both sides of Window Pane (DHN). Align the holes in the Pane with those in the Door, and gently set a Window Pane down onto the Door.
  • Page 39 FLOOR ASSEMBLY / ASSEMBLAGE DU PLANCHER / ENSAMBLE DEL PISO HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac quincaillerie Bolsa de herraje AHO (x2) ADC (x1) BQC (x20) Note: These Screws do not anchor the Floor; they only hold the Panels together. Remarque : Ces vis n’ancrent pas le plancher;...
  • Page 40 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • There is one type of Inner Floor Panel CUD. This Panel has two holes that look different but serve the same purpose. They receive the bushings that hold the bottom of the Door Hinge Tubes in place.
  • Page 41 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • When the two Inner Floor Panels (CUD) are attached to each other, one of each of these holes should be on the same edge as shown below. This edge will be the side of the shed where the Doors are installed.
  • Page 42 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Repeat the previous step. • Répéter l’étape précédente. • Repetir el paso anterior. Hole / Trou Agujero Note: If this hole is not at this corner, turn the Panel 180°.
  • Page 43 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS BQC (x18) AHO (x2) • Insert Bushings (AHO) through the holes in the Floor. The Doors will be installed here later. •...
  • Page 44 WALL ASSEMBLY / ASSEMBLAGE DES MURS / ENSAMBLE DE LOS MUROS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac quincaillerie Bolsa de herraje ADZ (x130) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal Parts / Pièces en métal Piezas de metal 67 3/4 in/po (≈1,72 m)
  • Page 45 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x28) • Insert a Wall Channel (AFM) into the groove just to the left notch of the seven (7) Wall Panels (AHD) as shown. Secure with four (4) Screws (ADZ) for each one.
  • Page 46 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS EPI (x1) • There is a narrow groove (illustrated in black) running along the outside of the window on the back of each Narrow Window Wall Panel (BDH &...
  • Page 47 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x28) EPI (x1) • Peel off the protective backing from both sides of Window Pane (BDV). Align the holes in the Pane with those in the Panel, and gently set a Window Pane down onto the Panel.
  • Page 48 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) • Insert a Wall Channel (AFM) into the fi rst • The two holes go at the top. •...
  • Page 49 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) • Insert tabs at the bottom of the Right Window Wall Panel (BDI) into the third and fourth slots from the front, right corner of the Floor.
  • Page 50 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) • Insert tabs at the bottom of the Corner Panel (AGW) into the fi rst two slots along the right edge of the Floor, and slide the Panel toward the front of the Floor.
  • Page 51 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 1 / CONTENU DE LA BOITE 1 CONTENIDO DE LA CAJA 1 BDJ (x1) BDK (x1) AGI (x2) AGH (x2) AGQ (x6) CUW (x2) CUD (x2) DRA (x1) BDR (x1) BDS (x1) AFV (x2)
  • Page 52 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS METAL PARTS KIT 1 / TROUSSE DE PIÈCES EN MÉTAL 1 KIT DE PIEZAS DE METAL 1 74 1/2 in/po (≈1,89 m) CRE (x2) 59 1/2 in/po (≈1,51 m) AFE (x2) 25 7/8 in/po (≈65,7 cm) 50 9/16 in/po (≈1,28 m) DSQ (x2)
  • Page 53 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 2 / CONTENU DE LA BOITE 2 CONTENIDO DE LA CAJA 2 FTM (x1) FTN (x1) BDH (x1) AFY (117) (x3) BDI (x1) AGL (x2) AGW (x2) AHD (x7) CONTENTS OF SMALL PARTS KIT / CONTENU DE LA TROUSSE DE PETITES PIÈCES...
  • Page 54 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 2 / CONTENU DE LA BOITE 2 CONTENIDO DE LA CAJA 2 HARDWARE BAGS / SACS DE QUINCAILLERIE BOLSAS DE HERRAJE...
  • Page 55 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x15) 7.10 • Secure the two Panels using fi ve (5) Screws (ADZ). • Fixer bien les deux panneaux à l’aide de cinq (5) vis (ADZ). •...
  • Page 56 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x20) 7.12 • For the right, rear Corner Panel (AGL), repeat the step done for the right, front Corner Panel.
  • Page 57 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x15) 7.14 • For the left, rear Corner Panel (AGW), repeat the step you did for the right, front Corner Panel. •...
  • Page 58 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x10) 7.16 • For the left, front Corner Panel (AGL), repeat the step you did for the right, front Corner Panel.
  • Page 59 SHELVING INSTALLATION / INSTALLATION DU RAYONNAGE / INSTALACIÓN DE LA ESTANTERÍA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje AIY (x4) ADZ (x28) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique Piezas de plástico...
  • Page 60 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIY (x2) • Insert the Shelf Brackets (AIY) into the slots in the Wall Support Channels. The Brackets must be at the same height. •...
  • Page 61 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x12) • Fold the fl aps on the ends of the Shelf (AFV) up, and set the Shelf onto the Brackets.
  • Page 62 ROOF ASSEMBLY / ASSEMBLAGE DU TOIT / ENSAMBLE DEL TEJADO HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac quincaillerie Bolsa de herraje DTV (x2) AHP (x2) ADZ (x160) ADX (x26) CXK (x2) AHL (x1) AEE (x2) AED (x24) ADK (x2) BZA (x2)
  • Page 63 ROOF ASSEMBLY / ASSEMBLAGE DU TOIT / ENSAMBLE DEL TEJADO PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique Piezas de plástico DRB (x1) AFW (116) (x1) AGG (115) (x1) AHC (x4) (x2) (x1) AFY (117) (x3) AGQ (x6) (x1) (x1)
  • Page 64 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x14) • Set a Side Gable down onto the right side of the shed. • Mettre un pignon latéral sur le côté droit de l’abri. •...
  • Page 65 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Place a Side Truss into the notches on the rear Wall Panel and Right Front Window Wall Panel. While an- other adult holds this in place, continue to the next step.
  • Page 66 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x4) • Align the four holes in the Wall Panel with those at the bottom of the Roof Panel, and insert four (4) Screws (ADZ) to secure the Panel in place.
  • Page 67 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x5) • Insert the fi rst three Screws (ADZ) through the Gable and into the Roof Panel and the fi rst two Screws (ADZ) through the Truss and into the Roof Panel at the locations shown.
  • Page 68 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x13) • Insert one Screw (ADZ) through the Gable and into the Roof Panel and one Screw (ADZ) through the Truss and into the Roof Panel at the locations shown.
  • Page 69 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x36) • Repeat steps 9.1–9.7 for the left side of the shed. AFL (x2) • Répéter les étapes 9.1 – 9.7 pour le côté droit de l’abri. •...
  • Page 70 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) DTV (x2) AEE (x2) CXK (x2) 9.10 • Secure the ends of the Support Tube to the Side Truss Channels using the hardware provided. •...
  • Page 71 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AHP (x2) 9.11 • Pull the Hinge Tube down out of the Left Door (the Door without the notched corner) about six inches. Align the hole at the bottom of the Hinge Tube with the slit in the Bushing, and insert the Tube.
  • Page 72 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) ADZ (x1) 9.12 • Slide the holes in the Entry Gable down over the two Hinge Tubes. The ends of the Gable go in the Trusses. •...
  • Page 73 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x20) ADX (x2) AHL (x1) 9.14 • Attach the two center, rear Roof Panels using only one Roof Support per Panel.
  • Page 74 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ECR (x1) ECS (x1) BZA (x2) ADK (x2) AEE (x4) 9.16 • Insert the Right Drainage Plate (ECS) into the Right Lateral Truss, and align the notch in the Plate with the fi rst hole in the Truss as shown.
  • Page 75 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x12) 9.17 • Fold the ends of the Large Angled Roof Panel (DRA), and set it down onto the shed as shown. Secure the Panel to the Entry Gable and Center Truss with twelve (12) Screws (ADZ) at the locations shown.
  • Page 76 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) ADZ (x2) 9.18 • Secure the Drainiage Plates from step 9.16 to the Roof at the location shown. Tighten the Nut on the Drainage Plate now.
  • Page 77 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x2) 9.19 • An adult must apply a downward pressure on Panel (DRB) during the insertion of the Screws (ADZ). •...
  • Page 78 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x18) 9.20 • An adult must apply a downward pressure on Panels (BDS & BDR) during the insertion of the Screws (ADZ). •...
  • Page 79 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x24) 9.21 • Starting at the left, secure the Roof Caps (AGG (115), AFY (117), and AFW (116)) to the Gables, Roof Panels and each other, and to the Trusses using the hardware included.
  • Page 80 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADX (x24) AED (x24) 9.22 • Fold the Skylights (AHC), and attach them to the Roof using six (6) Screws (ADX) and Washers (AED) for each Skylight. •...
  • Page 81 WALL HOOK INSTALLATION / INSTALLATION DES CROCHETS MURAUX / INSTALACIÓN DE LOS GANCHOS MURALES HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac quincaillerie Bolsa de herraje EDL (x6) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS TOOLS REQUIRED (NOT INCLUDED) / OUTILS REQUIS (NON INCLUS) / INSTRUMENTAL REQUERIDO (NO INCLUIDO) 81 81...
  • Page 82 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS EDL (x6) 10.2 • Insert the six (6) Wall Hooks (EDL) into any of the notches in the Wall Panels (along the rear Wall). Then push downward to lock them in place.
  • Page 83 SNOWLOAD KIT INSTALLATION / INSTALLATION DE L’ENSEMBLE DE LA CHARGE DE NEIGE / INSTALACIÓN DEL KIT DE LA CARGA DE NIEVE HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje BRK (x80) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal Parts / Pièces en métal...
  • Page 84 SECTION 11 (CONTINUED) / SECTION 11 (SUITE) SECCIÓN 11 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS BRK (x6) 5/16 in/po (≈8 mm) 11.1 • Abut the Gussett (EGQ) against the Truss Gutter Channel so the top, horizontal border of the Gusset is parallel with the Truss Brace.
  • Page 85 SECTION 11 (CONTINUED) / SECTION 11 (SUITE) SECCIÓN 11 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (11 mm) 5/16 in/po BRK (x58) (≈8 mm) 7/16 in/po (≈11 mm) 11.2 • Repeat the last step for both sides and both ends of each Truss except for the front end of the Center Truss. •...
  • Page 86 SECTION 11 (CONTINUED) / SECTION 11 (SUITE) SECCIÓN 11 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS BRK (x8) 5/16 in/po (≈8 mm) 7/16 in/po (x2) (≈11 mm) (x2) 11.4 • Repeat step 11.3 for the remaining two Truss Assemblies. Tighten the Cap Nuts. •...
  • Page 87 SECTION 11 (CONTINUED) / SECTION 11 (SUITE) SECCIÓN 11 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS BRK (x2) 5/16 in/po (≈8 mm) 11.5 • Place the Left Gable Support (EGR) up fl ush against the Entry Gable and Roof as shown. Secure with two (2) Self- Tapping Screws (BRK) to the Center Truss.
  • Page 88 SECTION 11 (CONTINUED) / SECTION 11 (SUITE) SECCIÓN 11 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS BRK (x6) 5/16 in/po (≈8 mm) 11.6 • Insert two (2) Self-Tapping Screws (BRK) through the Gable and into the Door Hinge Tube. The holes are oval shaped in case it’s easier to insert the Screws into the Hinge Tube at an angle.
  • Page 89 DOOR ALIGNMENT / ALIGNEMENT DES PORTES / ALINEACIÓN DE LAS PUERTAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac quincaillerie Bolsa de herraje NO HARDWARE REQUIRED FOR THIS SECTION AUCUNE QUINCAILLERIE REQUISE POUR CETTE SECTION NINGÚN HERRAJE REQUERIDO PARA ESTA SECCIÓN PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique...
  • Page 90 SECTION 12 (CONTINUED) / SECTION 12 (SUITE) SECCIÓN 12 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIX (x4) • If the Doors are not level, follow the steps on this page or the next to even them out. •...
  • Page 91 SECTION 12 (CONTINUED) / SECTION 12 (SUITE) SECCIÓN 12 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (≈11 mm) 12.2 • Once the Doors are the same height, have one adult with the tools stand inside the shed. Close the Doors and lock them.
  • Page 92 SHED ANCHORING / ANCRAGE DE L’ABRI / ANCLAJE DE LA CASETA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS TOOLS REQUIRED (NOT INCLUDED) / OUTILS REQUIS (NON INCLUS) / INSTRUMENTAL REQUERIDO (NO INCLUIDO) 5/16”...
  • Page 93 SECTION 13 (CONTINUED) / SECCIÓN 13 (CONTINUACIÓN) SECTION 13 (SUITE) FOR CONCRETE PLATFORMS / POUR LES PLATE-FORMES EN BÉTON PARA PLATAFORMAS DE CONCRETO 5/16 in/po (8 mm) 13.1 • To anchor your shed, you must purchase the correct anchoring hardware. For a concrete platform, we recommend using a hammer drill, 5/16"...
  • Page 94 SECTION 13 (CONTINUED) / SECCIÓN 13 (CONTINUACIÓN) SECTION 13 (SUITE) FOR WOOD PLATFORMS / POUR LES PLATE-FORMES EN BOIS PARA PLATAFORMAS DE MADERA 5/16 in/po (8 mm) 13.1 • To anchor your shed, you must purchase the correct anchoring hardware. For a wood-framed platform, we recommend using a drill, 5/16"...
  • Page 95 NOTES / REMARQUES / NOTAS 95 95...
  • Page 96 NOTES / REMARQUES / NOTAS 96 96...
  • Page 97 NOTES / REMARQUES / NOTAS 97 97...
  • Page 98 Congratulations on your Lifetime ® product purchase. By following the instructions below, your new Lifetime product should provide you with years of service and enjoyment. The polyethylene panels are stain and solvent resistant. Most stains can be removed using a mild soap and a soft-bristled brush.
  • Page 99 à des tiers, et ne leur permettra pas d’utiliser vos données personnelles à leurs propres fi ns. Nous vous invitons à lire notre politique de confi dentialité à www.lifetime.com (en anglais seulement) ENREGISTRER CE PRODUIT aujourd’hui! REGISTRAR EL PRODUCTO EN LÍNEA EN WWW.LIFETIME.COM...
  • Page 100 All merchandise is sold on this condition, and no representative of the company may waive or change this policy. 5. This product is not intended for institutional or commercial use; Lifetime Products, Inc. does not assume any liability for such use. Institutional or commercial use will void the warranty.
  • Page 101 2. Cette garantie n’est pas transférable et est expressément limitée à la réparation ou au remplacement du produit défectueux. © Si le produit est déclaré défectueux selon les termes de cette garantie, Lifetime Products, Inc. réparera ou remplacera les parties défectueuses gratuitement pour l’acheteur. Les frais d’expédition aller et retour de l’usine ne sont pas couverts et sont à...
  • Page 102 NO ESTÁN DISPONIBLES O SON OBSOLETAS. 1. El comprador original recibe la garantía de que las casetas Lifetime estarán libres de defectos de material o de mano de obra por un período de 10 años a contar desde la fecha de la compra original. La palabra “defectos” se defi ne como imperfecciones que perjudican el uso del producto.
  • Page 103 IMPORT INFORMATION / IMPORTATIONS / INFORMACIÓN DE IMPORTACIONES Costco Wholesale Korea, Ltd. Distributed by: 40, Iljik-ro Costco Wholesale Corporation Gwangmyeong-si P.O. Box 34535 Gyeonggi-do, 14347, Korea Seattle, WA 98124-1535 1899-9900 1-800-774-2678 www.costco.co.kr www.costco.com Importado por: Importadora Primex S.A. de C.V. Costco Wholesale Canada Ltd.* Blvd.
  • Page 104 ® AMÉLIORER VOTRE ACHAT LIFETIME EN AJOUTANT DES ACCESSOIRES OU D’AUTRES PRODUITS ® Pour acheter des accessoires ou d’autres produits Lifetime , nous rendre visite à : www.lifetime.com Ou composer le 1-800-424-3865 Du lundi au vendredi 7 h – 17 h (HNR) et samedi 9 h – 13 h (HNR) ®...

Ce manuel est également adapté pour:

1902292