Publicité
BATTERY IN VEHICLE
(NEGATIVE GROUND)
Before connecting and disconnecting the DC
1
output clamps, remove the AC plug from the
electrical outlet.
Check polarity of battery posts.
2
A positive (POS, P, +) battery post usually has
a larger diameter than a negative (NEG, N, -)
battery post.
Connect the positive (red) clip from the
3
battery charger to the positive (POS, P, +)
ungrounded post of battery.
Connect the negative (black) clip to vehicle
4
chassis (must be a heavy gauge metal part of
the frame) or engine block away from battery.
DO NOT connect clip to carburetor, fuel lines,
or sheet-metal body parts.
Connect charger AC supply cord to electric
5
outlet. (Reverse process to remove charger.)
NOTE:
NEVER allow the DC output clamps to touch each other. This may cause a spark.
Remove the AC plug from the electrical outlet before connecting and disconnecting the DC output clamps.
To reduce the risk of a spark near battery:
• Position AC and DC cords to reduce the risk of damage by hood, door, or moving engine part.
• Stay clear of fan blades, pulleys, and other parts that can cause injury.
• Check polarity of battery posts. A positive (POS, P, +) battery post usually has a larger
diam eter than a negative (NEG, N, -) battery post.
WARNING!
A spark near a battery may cause a battery explosion!
NOTE: a marine battery installed in a boat must be removed and charged
on shore. To charge it onboard requires equipment specially designed for
marine use.
BATTERY IN VEHICLE
(POSITIVE GROUND)
Before connecting and disconnecting the DC
1
output clamps, remove the AC plug from the
electrical outlet.
Connect the negative (black) clip from the
2
battery charger to the negative (NEG, N, -)
ungrounded post of battery.
Connect the positive (red) clip to vehicle
3
chassis (must be a heavy gauge metal part of
the frame) or engine block away from battery.
DO NOT connect clip to carburetor, fuel lines,
or sheet-metal body parts.
Connect charger AC supply cord to electric
4
outlet. (Reverse process to remove charger.)
7
Publicité
