Publicité
14
model no. 011-1980-4 | contact us 1-888-942-6686
USING THE BATTERY VOLTAGE TESTER
1.
With the charger unplugged from the AC outlet,
connect the charger to the battery, following the
instructions given in previous sections.
2.
Plug the charger AC power cord into the AC
outlet.
3.
If necessary, press the Battery Type button
until the correct type is indicated.
4.
Read the voltage on the digital display. Keep
in mind that this reading is only a battery
voltage reading; a false surface charge may
mislead you. Compare the reading to the
following chart.
6 V BATTERY
VOLTAGE
READING
6.4 or more
6.1 to 6.3
Less than 6.1
NOTE:
The battery tester is only designed to test batteries. Testing a device with a rapidly changing
voltage could yield unexpected or inaccurate results.
12 V BATTERY
BATTERY
VOLTAGE
CONDITION
READING
12.8 or more
Charged
12.2 to 12.7
Needs charging
Less than 12.2
Discharged
TESTER AND CHARGER
When first turned on, the unit operates only as a
tester, not as a charger. Pressing the Start/Stop
button or waiting 30 seconds from power-up
activates the battery charger and deactivates the
tester. Pressing the Start/Stop button again will
shut off the charger and activate the tester.
TESTING AFTER CHARGING
After the unit has been changed from tester to
charger, it remains a charger. To change the
battery charger back to a tester, press the
Start/Stop button.
POWER-UP AUTO START
The charger is equipped with an auto-start
feature which is triggered only when the charger
is first powered up. If the Start button is not
pressed within 30 seconds, the unit will search
for a battery. If the unit detects a battery that is
properly connected, the unit will set the rate to
Charge and the battery type will be set to AGM.
The charging process will automatically start,
and the Charging (yellow) LED will light.
Publicité
