Télécharger Imprimer la page

Motomaster ELIMINATOR Atelier Serie Guide D'utilisation page 11

Masquer les pouces Voir aussi pour ELIMINATOR Atelier Serie:

Publicité

CHARGING YOUR BATTERY
1.
Follow the instructions in the Connecting
Your Battery section to connect your battery,
and then connect the charger to a live AC
electrical outlet.
2.
Upon power-up, the default selections for
battery type will be AGM and the rate will be
6 A Charge. If these are not preferred, select
a different battery type (Standard or Gel) and
for the rate choose Boost Charge.
3.
Press the Start/Stop button to begin charg-
ing immediately. If the Start button is not
pressed within 30 seconds after power-up,
and a battery is properly connected, the
charging process will begin automatically.
4.
When charging is complete,
a.
If done charging, press the Stop button,
disconnect the charger from AC power,
and disconnect the battery clamps fol-
lowing the instructions for disconnection
in the Connecting Your Battery section.
b.
To keep the battery in Maintain Mode,
do not press the Stop button, and leave
all connections. For more information,
see the Maintain Mode section.
NOTE:
Charger will NOT begin charging if the solid red LED is on, indicating the battery clamps are reversed.
See the Operation section for a complete description of the charger modes.
BATTERY CHARGING TIMES
Ah – Amp Hour
CCA – Cold Cranking Amps
RC – Reserve Capacity
NR – Not Recommended
BATTERY SIZE/RATING
Small Batteries
25-32 Ah
200-315 CCA
40-60 RC
Cars
and
315-550 CCA
60-85 RC
Trucks
550-1000 CCA
85-190 RC
80 RC
140 RC
Marine/Deep-Cycle
160 RC
180 RC
Times are based on a 50% discharged battery and may
change, depending on age and condition of battery.
AUTOMATIC VOLTAGE DETECTION
The charger is equipped with Auto Voltage
Detection, which automatically detects whether
the battery is 6 V or 12 V and then charges
accordingly.
11
40 A<>15 A
6 A
BOOST
CHARGE
CHARGE
1¼-3¼ h
NR
3¾-4¾ h
1-1¾ h
4¾-6 h
1¾-2 h
6-11½ h
2-3¾ h
6 h
2 h
9 h
3 h
10 h
3¼ h
11 h
3½ h

Publicité

loading

Ce manuel est également adapté pour:

Eliminator atelier 011-1980-4