Télécharger Imprimer la page

Lux Tools A-KS-2x20/4/30 Notice Originale page 60

Masquer les pouces Voir aussi pour A-KS-2x20/4/30:

Publicité

GB
• Symbols appearing on your product may
not be removed or covered. Information
on the product that are no longer legible
must be replaced immediately.
Be careful when handling the device!
Observe all safety instructions in the
instructions for use!
Read and observe the operating in-
structions before commissioning.
Do not expose the machine to mois-
ture.
Area with a danger of kickback
Always hold the device firmly in both
hands.
Always maintain a sufficiently safe
distance.
Only re-charge the battery pack in-
doors.
Do not dispose of a battery pack in
water!
Do not burn the battery pack!
Do not expose the battery pack to
sunlight or increased temperatures!
MAX. 40°C
Length of the saw bar
XXX mm
Risks caused by vibrations
CAUTION! Risk of injury due to
vibrations! Vibrations may, in par-
ticular for persons with circulation
problems, cause damage to blood
vessels and/or nerves.
If you notice any of the following
symptoms, stop working immediately
and consult a doctor. Numbness of
body parts, loss of sense of feeling,
itching, pins and needles, pain,
changes in skin colour.
The vibration values specified in the technical
data represent the main uses of the device.
The actual existing vibrations during use may
deviate from these as a result of the following
factors:
• Incorrect use of the product;
• Unsuitable tools inserted;
• Unsuitable material;
• Insufficient maintenance.
You can reduce the risks considerably by fol-
lowing the tips below:
– Maintain the device in accordance with
the instructions in the operating instruc-
tions.
60
– Avoid working at low temperatures.
– When it is cold, make sure your body and
your hands, in particular, are kept warm.
– Take regular breaks and move your hands
at the same time to promote circulation.
Personal protective equipment/sensible
clothing
When cutting, wear the following protective
equipment:
Eye protection: wrap-around gog-
gles/protective visor on the helmet
Ear protection: earplugs/ear muffs
Head protection: safety helmet with
visor
Foot protection: safety shoes with
gripping soles, steel caps and leg
protection
Hand protection: protective chainsaw
gloves
Clothing: safety overalls (cut-proof),
Safety jacket (cut-proof)
Avoid with your clothing that you get caught
on something:
• Wear only close-fitting clothing!
• Do not wear any jewellery!
• If you have long hair, wear a hair net!
Your device at a glance
Note: The actual appearance of your
product may differ from the illustra-
tions.
Chain saw
► P. 3, fig. 1
1. Rear handle
2. Fill opening for chain oil (tank cover)
3. Front hand guard (trigger for chain brake)
4. Saw chain
5. Saw bar
6. Chain tensioning screw
7. Quick locking device (for saw bar)
8. Chain wheel guard
9. Sight glass for oil level
10. Rear hand guard
► P. 3, fig. 2
11. Safety lock
12. On-Off switch
13. Battery pack
14. Front handle
20. Protective cover

Publicité

loading

Ce manuel est également adapté pour:

196076