Publicité
54
3 Check whether all wall brackets (V brackets) of your heater point
in the same direction with the opening. If not, align the V-brackets
uniformly in one direction. It doesn't matter which direction it is.
In case of ceiling assembly, make sure the next assembly step is
undertaken
by
two
(if required).
4 Lift the heater to the mounting position so that the openings
of
the
V-brackets
the screws that are already in place.
5 Slide the heater sideways until the screws are fully engaged
into the V-brackets. Pay attention to the washers.
6 Lock the heater in place by rotating the V-brackets 180º:
Wall mounting:
Turn any "V-bracket"
7 Tighten all 8 or 12 screws using both 8 and 10 mm spanners. Check the
secure fi tting of the heater.
people.
Have
a
ladder
are
situated
directly
2
1
Ceiling mounting:
Turn any two "V-brackets"
at
hand
in
front
of
Publicité
