Publicité
3.5 - Positioning of the
receiver
52
The positioning of the receiver may only be done on the edge of the hea-
ter or by mounting it on the room ceiling.
WARNING:
DO NOT PLACE IN THE CENTER OF THE BACK PANEL
OF THE HEATER! RISK OF OVERHEATING!
125
35
•
Remove the protective fi lm from the adhesive tape on the back of the
wireless receiver.
•
Attach the wireless receiver to the back of the infrared heater in one
of the four shown positions.
•
Ensure that the side with the control element is facing outward so
that you can operate the wireless receiver after the heater is mounted.
•
Make sure to maintain a minimum distance of 2.5 cm from the
V-brackets to allow for their rotation during heater installation.
•
Press the wireless receiver fi rmly and ensure that it adheres completely
to the back surface.
Publicité
