Publicité
1.3 - General safety
information
Danger due to incorrect
operation
Risk of material damage
due to overheating
Danger due to inadequate
qualifi cation
Electric shock
Hot components
Material damage due to
unsuitable tools
Caution - some product parts can get very hot and cause burns. Special
care should be taken if children and vulnerable persons are present.
Children should not be allowed to play with the product.
Any use other than what is described in this manual or use going beyond
what is listed here shall be considered improper.
Proper use also covers installation in accordance with the IP class.
Improper use also includes any type of direct commercial or
industrial use.
Attention!
Any unauthorised use is prohibited.
Incorrect operation may endanger you and others around you and cause
material damage.
• Carefully read through this manual and all accompanying documentation,
especially Chapter "1 Safety" and the warning information.
• Only carry out those activities that this operating manual instructs
you to do.
Ensure that the product is not covered or clad.
Only personnel with su cient qualifi cation for the task in hand may carry
out the following work:
– Assembly
– Disassembly
– Installation
– Commissioning
– Inspection and maintenance
– Repairs
– Decommissioning
• Observe all product-related instructions.
• Proceed in accordance with the current state-of-the-art.
• Comply
with
all
relevant
provisions
A danger to life due to electric shock exists whenever live components
are touched.
Before working on the product:
• Unplug the power connector.
• Or
de-energize
the
supplies (electric isolator with at least a 3 mm contact opening, such as
a fuse or circuit breaker).
• Secure against reconnection.
• Check for the absence of voltage.
Only work on components once they have cooled down.
Use a specialist tool to tighten or loosen screw connections.
guidelines,
norms,
product
by
switching
laws
and
other
o
all
power
47
Publicité
