Power and Sound Controls
Power
If the car is not already running, turn the key in the ignition until
the accessory indicator lights.
Press [PWR] to switch on the power.
Press [PWR] again to switch off the power.
When power is turned off while the time is displayed, the clock
mode remains on. When the [PWR] is pressed again, the system
is completely off.
Note: When a CD is inserted with all power connected, the unit
power will automatically turn on and CD loading begins and plays.
Volume
è Press [A VOL] or [VY VOL] to increase or decrease volume.
è Press [A VOL] or [V VOL] for more than 0.5 second to
change numeric levels on the display rapidly.
Attenuator
e Press [ATT]. Volume will decrease to about "io of its previous
level.
e Press
[ATT]
again to deactivate
when
listening at normal
volume.
Tone Enhancement
Press LOUD [L] to enhance bass and treble tones when listening
at low or medium volume. Press LOUD [L] again to deactivate.
Note: This unit is equipped with an anti-volume-blast circuit which serves as an automatic vol-
ume level adjuster so that you will not be deafened sudden loud voiume.
This system operates as follows. When [PWR] is switched on, the volume level is low. After
that, the volume level gradually returns to its previous level prior to switching off the unit.
CO-DPX33/0P22EUC
E
N
G
L
I
S
H
om