Publicité
© Installation Procedures
1. Secure the Mounting Collar @.
Insert Mounting Collar @ into the cars dashboard, and bend mounting tabs out with a screwdriver.
Mounting Tab
mr
-7
l
-
-
_—
@ Mounting Collar
a
Lock Lever
Make sure that the lock
lever is flush with the
mounting
collar
(not
projecting outward).
Screwdriver
2. Secure the rear of the unit.
a) Check the electrical connection by referring to this operating instructions.
b) Connect the Mounting Boit ©), using a suitable wrench.
c) Insert the unit into Mounting Collar @ and push it in until "click" is heard.
d) Secure the rear of the unit to the car by either of the two recommended methods.
€ Using the Rear Support Strap ©
. Affix one end of the Rear Support Strap © to the rear of the unit, and the other end to the Fire Wall of
Car, or some other metallic area.
Fire Wall of Car
@ Tapping Screw
:
3 mmo
(D Mounting Collar
19
CO-DPX33/DP22EUC
Publicité
