Bosch B36CT Serie Manuel D'utilisation page 8

en-us Installation and connection
¡ Installation material
¡ Installation instructions
¡ User manual
¡ Explanation of the limited product warranty
¡ Warranty enclosure 1
¡ Energy label
¡ Information on energy consumption and noises
¡ Information about Home Connect®
4.2 Criteria for the installation location
WARNING
If the appliance is in a space that is too small, a leak in the
refrigeration circuit may result in a flammable mixture of
gas and air.
Only install the appliance in a space with a volume of at
▶
least 35 ft 3 (1 m 3 ) per 0.3 oz (8 g) refrigerant. The
amount of refrigerant is indicated on the rating label.
→ "Appliance", Fig.
/
1
The weight of the appliance from factory may be up to
345 lbs (155 kg) depending on the model.
The subfloor must be sufficiently stable to bear the weight
of the appliance.
The surface must be level.
Over-and-under and side-by-side installation
If you want to install 2 refrigerating appliances one over
the other or side by side, you must maintain a clearance of
at least 150 mm between the appliances. Selected
appliances can be installed without a minimum clearance.
Ask your dealer or kitchen planner about this.
4.3 Installing the appliance
Install the appliance in accordance with the enclosed
▶
installation instructions.
4.4 Preparing the appliance for first use
Remove the information material.
1.
Remove the protective film and transit bolts, e.g.
2.
remove the adhesive strips and cardboard.
Clean the appliance for the first time. → Page 22
3.
4.5 Connecting the appliance to the drinking
water connection
Requirements
¡ A shut-off valve must be installed on the water
connection and be freely accessible following
installation of the appliance.
¡ Ensure that the water coming from the water connection
is potable.
Rinse the drinking water connection thoroughly until the
1.
drinking water is no longer cloudy and contains no
deposits.
1 Not in all countries
8
, Page 10
13
If the drinking water is still cloudy or contains deposits,
install an external water filter system.
Install the drinking water connection according to the
2.
enclosed installation instructions.
4.6 Connecting the appliance to the
electricity supply
Insert the non-heating appliance plug of the power cord
1.
into the appliance.
Insert the power plug of the appliance's power cord in a
2.
socket outlet with grounding nearby.
The connection data of the appliance can be found on
the rating plate. → "Appliance", Fig.
Check the power plug is inserted properly.
3.
a The appliance is now ready to use.
/ , Page 10
13
1