Publicité
LOCATION AND FUNCTION OF PARTS AND CONTROLS
(See page 5.)
FRONT
@ a/& STOP/EJECT button
Press to stop the tape.
This button |s also used to release the ERASE switch.
To remove the cassette, press again.
Opp FF (fast forward) button
Press to advance the tape rapidly.
To erase the recorded material, slide the ERASE
switch in the direction of the arrow first, then press
this button.
@<4<4 REW (rewind) button
Press to rewind the tape.
To erase the recorded material, slide the ERASE
switch in the direction of the arrow first, then press
this button.
Q@ERASE switch and lamp
Slide in the direction of the arrow to erase the record-
ed material. The lamp will light up.
ORUN Indicator
Whife the tape is being rewound, the indicator lights
up from right to left. While the tape is being advanced
rapidly, the indicator lights up from left to right.
REAR
@DC IN 6 V jack
Connect an AC-D4 ac power adaptor or DCC-127A car
battery cord.
@POWER switch
Set to ON to turn on the power and to OFF to turn off
the power.
Publicité
