Publicité
RD-606i(A)_ENG_110414_RD-606i(A)_ENG 2011-05-04 오후 2:13 페이지 46
Memorizing the adjusted channel levels
• You can memorize the adjusted channel levels into preset
memory("REF 1", "REF 2") and recall the memorized
whenever you want.
1.
After performing the steps 1 ~ 3 in "Adjusting the
current channel level" procedure on page 45,
press the ENTER button.
CH
L V
M
O
D E
• Then "1" of "REF 1" indication flickers.
2.
Press the CURSOR LEFT(◀)/RIGHT(▶)
buttons to select the desired preset memory,
then press the ENTER button.
• Each time the CURSOR LEFT(◀) or RIGHT(▶) button is
pressed, "REF 1" or "REF 2" is selected.
• The adjusted channel levels have now been memorized
into the selected memory.
All manuals and user guides at all-guides.com
AT
3 0
L
S T
E
U P
:
R
E F1
Recalling the memorized channel levels
1.
Press the CURSOR UP(▲)/DOWN(▼) buttons
to select the "MODE ~ ".
CH
L V
L
S T
E
M
O
D E
• "CAL" may be displayed instead of "REF 1" or "REF 2".
2.
Press the CURSOR LEFT(◀)/RIGHT(▶)
buttons to select the desired one of REF 1 and
REF 2.
• Then the channel levels memorized into the selected
preset memory are recalled.
46
AT
3 0
U P
:
C
A L
Publicité
