Publicité
Before using your appliance for the first time and regularly after that, we recommend that you clean the
inside and outside (front, side and top) with warm mixed with a gentle cleaning product. Rinse with
clean water and allow drying before reconnecting. Do not use solvents or abrasives.
When the appliance is switched on for the first time, there may be a residual smell. In that case, runt
the appliance empty for a few hours at the coldest possible temperature. The cold will kill any smell.
Automatic defrost
An automatic defrost is programmed on your cellar. There is no impact for wines stored in the cellar
during the defrosting phase.
During defrost; the compressor and the fans will be off. The digital display will show normal
temperature, however if you want to display the actual temperature of your cellar, the display will show
you the code "DD" which is normal.
Changing the carbon filter
Your wine cellar is equipped with a charcoal filter, which is positioned at the bottom right corner of your
cellar. We recommend that you replace it once a year. To replace it, simply pull it out from inside the
cellar and put a new filter back in.
In the event of a power cut
The majority of power outages are resolved within a short period of time.
A shutdown of 1 or 2 hours will not affect your cellar temperatures.
To protect your wines during power cuts, consider minimizing the number of door openings.
For very long power cuts, take the necessary measures to protect your wine.
o
If the device is unplugged, turned off or there is a power cut, you must wait 3 to 5 minutes
before restarting it. If you try to restart it before this time, the compressor will start only after 3/5
minutes (if the temperature requires it).
o
At the first start-up and following a prolonged shutdown of the cellar, it is possible that when
restarting the temperatures chosen and those displayed do not correspond. This is normal. It
will then be necessary to wait a few hours before the temperatures regain their stability.
o
In the event of a power cut, the device stores the set temperatures in memory. When the
appliance is put back into service, it is therefore unnecessary to reprogram the cellar
temperatures.
Warning ! During a power cut, the ECELLAR no longer records movements, so avoid modifying
the wine stock.
When the power is turned on again, the cellar will update the stocks in order to detect the
release or addition of a new bottle.
If an add or remove operation is performed via the app, it will save the changes, but if it is a free
action (without going through the app) and a bottle is removed and replaced by a new one at
the same location, the cellar will not make the distinction when it is restarted.
If you go on vacation
Short stays: let your cellar operate during your stay if it lasts less than 3 weeks.
Long stays: if your device is not to be used for several months, remove all bottles and accessories,
turn off and unplug the device from the power outlet. Clean and dry the inside and outside of the
appliance thoroughly. Also leave the door open, blocking it if necessary, to prevent the formation of
condensate, odors and mold.
69
Publicité
