Description Of The Device; Features - Futurelight PCC-500 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Please use the original packaging if the device is to be transported. Make sure that you pack the device in
the original state.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, crash etc.

DESCRIPTION OF THE DEVICE

Features

Innovative colour-changer
• DMX-controlled operation or stand alone operation with Master/Slave-function
• 48 preprogrammed scenes in Program Run for stand alone operation
• Number of scenes in Program Run can be changed individually
• The scenes in Program Run can be modified via the Control Board or via an external controller and loaded
into the memory
• 8 built-in programs can be called up via DMX-controller
• Sound-controlled via built-in microphone
• Control-Board with 4-digit display and foil-keyboard for adjusting the DMX-starting address, Program,
Reset, lamp on/off
• For bright HPL 575 W lamp
• Colour-wheel 1 with 5 different, dichroic colour-filtres and white
• Colour-wheel 2 with 4 different, dichroic colour-filtres, blackout and white
• DMX-control via every standard DMX-controller
28/84
00026543.DOC, Versiom 1.5

Publicité

Table des Matières
loading

Table des Matières