Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
- Main menu 1
• Press [MODE/ENTER] to enter the main menu (display flashing).
• Press [UP] or [DOWN] to select "SET".
- Lamp pre-heat
With this function, you can adjust the lamp pre-heat between 0 % and 10 %.
• Select "HEAT" by pressing [UP] or [DN].
• Press [MODE/ENTER] to confirm; the display shows "H-00".
• Press [UP] to adjust the desired sensitivity.
• Press [MODE/ENTER] to confirm.
• Press [EXIT] in order to return to the main menu.
- Mic sensitivity
With this function, you can select the desired microphone sensitivity between 20 % and 70 %.
• Select "MIC" by pressing [UP] or [DOWN].
• Press [MODE/ENTER] to confirm; the display shows "M-70".
• Press [UP] to select the desired sensitivity.
• Press [MODE/ENTER] to confirm.
• Press [EXIT] in order to return to the main menu.
- Auto run if no DMX
With this function, you can set the device to auto run if no DMX-signal.
• Select "AUTO" by pressing [UP] or [DOWN].
• Press [MODE/ENTER], the display shows "ON" or "OFF".
• Press [UP] to select "ON" if you wish to enable this function or [DOWN] to select "OFF" if you don't.
• Press [MODE/ENTER] to confirm.
• Press [EXIT] in order to return to the main menu.
- Music control if no DMX
With this function, you can set the device to sound-controlled program-run if no DMX-signal.
• Select "SOUN" by pressing [UP] or [DOWN].
• Press [MODE/ENTER], the display shows "ON" or "OFF".
• Press [UP] to select "ON" if you wish to enable this function or [DOWN] to select "OFF" if you don't.
• Press [MODE/ENTER] to confirm.
• Press [EXIT] in order to return to the main menu.
- Adjust ventilation fan
With this function, you can adjust the ventilation fan.
• Select "FANS" by pressing [UP] or [DOWN].
• Press [MODE/ENTER] to confirm; the display shows "AUTO".
• Press [UP] to select "HIGH" or "AUTO".
• Press [MODE/ENTER] to confirm.
• Press [EXIT] in order to return to the main menu.
Rest
- Reset
With this function you can Reset the device via the Control Board.
• Select "REST" by pressing [UP] or [DOWN].
• Press [MODE/ENTER] to confirm.
• Press [EXIT] in order to return to the main menu.
39/84
00026543.DOC, Versiom 1.5
Publicité
Table des Matières
