Télécharger Imprimer la page

Ryobi RY18BLB Mode D'emploi page 5

Publicité

Do not modify the product in any way or
use parts and accessories that are not
recommended by the manufacturer.
If the product is dropped, suffers heavy
impact, or begins to vibrate abnormally,
immediately stop the product and inspect
for damage or identify the cause of the
vibration. Any damage should be properly
repaired or replaced by an authorised
service centre.
BLOWER SAFETY WARNINGS
Wear a face filter mask in dusty conditions
to reduce the risk of injury associated with
the inhalation of dust.
Slightly
dampen
conditions.
Do not use the product near open windows.
Use the full blower nozzle extension so that
the air stream can work close to the ground
and perform effectively.
Do not point the blower nozzle in the
direction of people or pets.
Never place objects inside the blower tubes.
Do not place the product on top of or near
loose debris. Debris can be sucked into the
intake vent, resulting in possible damage to
the product.
ADDITIONAL BATTERY SAFETY WARNINGS
To reduce the risk of fi re, personal injury,
and product damage due to a short circuit,
never immerse the product, battery pack, or
charger in fl uid or allow fl uid to fl ow inside
them. Corrosive or conductive fl uids, such as
seawater, certain industrial chemicals, and
bleach or bleach-containing products, etc., can
cause a short circuit.
TRANSPORTATION AND STORAGE
Turn off the product, remove the battery
pack, and allow it to cool down before
storing or transporting.
Remove all foreign materials from the
product. Store the product in a cool,
surfaces
in
dusty
dry, and well-ventilated place that is
inaccessible to children. Keep the product
away from corrosive agents, such as
garden chemicals and de-icing salts. Do
not store the product outdoors.
For transportation in a vehicle, secure the
product against movement or falling to
prevent injury to persons or damage to the
product.
TRANSPORTING LITHIUM BATTERIES
Transport the battery pack in accordance
with local and national provisions and
regulations.
Follow all special requirements on packaging
and labelling when transporting batteries by a
third party. Ensure that no batteries can come
in contact with other batteries or conductive
materials while in transport by protecting
exposed connectors with insulating, non-
conductive caps or tape. Do not transport
battery packs that are cracked or leaking.
Check with the forwarding company for further
advice.
MAINTENANCE
Use
only
original
replacement
parts,
attachments. Failure to do so can cause
possible injury, can contribute to poor
performance, and may void your warranty.
Servicing
requires
knowledge and should be performed only
by a qualified service technician. Have the
product serviced by an authorised service
centre only.
Check all nuts, bolts, and screws at frequent
intervals for proper tightness to ensure that
the product is in safe working condition. Any
part that is damaged should be properly
repaired or replaced by an authorised
service centre.
Bring the product to an authorised service
centre to replace damaged or unreadable
labels.
You may make adjustments or repairs
that are described in this manual. For
manufacturer's
accessories,
and
extreme
care
and
5
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL

Publicité

loading