Publicité
INSTALLATION AND MAINTENANCE MANUAL
DEWATERING PUMP SERIES LION-150SW
8. TRANSPORT
The machines in question shall be supplied in suitable packaging to ensure proper protection during all
stages of transport. If, on receipt of the goods, the packaging is damaged, it is necessary to ensure that
the machine has not been damaged during transport and that it has not been tampered with. In the event
of damage to the equipment or if any part of the machine is found to be missing, the transporter and the
manufacturer must be notified immediately and the corresponding photographic documentation must
be provided.
Materials used to protect the device during transport must be disposed of using the disposal channels
existing in the country of destination.
9. LIFTING AND DISPLACEMENT
For all lifting and moving operations, the operator must use the minimum personal protection devices
required for the operations to be carried out (safety footwear, gloves and protective helmet).
Machines with a dead weight of more than 25 kg must be moved using suitable handling systems
with a capacity greater than the weight of the machine to be handled (see the weight indicated on the
packaging). If it is necessary to use belts for handling the machine, these must be in good condition and
must be of adequate strength for the weight of the machine to be handled.
Pumps weighing <25 kg may be lifted manually by the operator without the aid of lifting gear.
10. STORAGE
The equipment must always be stored in covered, not excessively humid places, protected from
atmospheric agents and with temperatures between -10°C and 40°C, avoiding direct exposure to
sunlight. If the machine is to be stored for long periods, it is advisable not to remove it from its packaging.
www.proindecsa.com / proindecsa@proindecsa.com
14
Publicité
