Publicité
13
When the condensate drain pipes are being connected, the pipe system must be sufficiently supported in order to prevent strain on the
condensate drain tray. The condensate drain system should be fitted with a siphon to prevent odours. The siphon can be either on the
unit or on the final condensate connection (downstream from the condensate trap). Pour water into the condensate trap and check that
it drains normally. If not, check the drain angle.
14
On the side of the hydronic connection, you can also find the terminal block for the electrical connection.The electrical connection is
connected to the black block at the base of the protective cover.
15
Mount the valve cover plate. Cover the casing with the protection
foil and the protective cover.
This protective screen must remain on the unit during the
entire construction phase.
36
30mm/m
16
If screed is used the device needs to be completely insulated in
order to protect the device from voltage differences.
JAGA N.V. | CLIMA CANAL H13 B32 | MANUEL | 2024.10.11 | V.1.02
0 20mm
1
2
+
3
+
-
-
24VDC
0...10V
Publicité
