Publicité
3. INSTALLATION
ALWAYS USE THE MAIN SWITCH TO DISCONNECT THE POWER TO THE FAN
01
03
Mount the sound decoupler around each height adjuster
05
Unscrew the control screws in the bottom of the unit and place
the plastic caps on the bottom of the screws to prevent vibrations
and noise to the floor.
34
02
Remove the valve cover plate before installing the device.
04
Fix the height adjusters to the casing. Do not completely tighten
the bolt.
06
Break the metal strip on the short end of the casing ( to enable
continuous installation of the grille).
Only on the ends that need to be connected
JAGA N.V. | CLIMA CANAL H13 B32 | MANUEL | 2024.10.11 | V.1.02
THROUGH-MOUNTING
Publicité
