Publicité
07
THROUGH-MOUNTING
Make sure that the units are positioned correctly and that the
casings fit tightly. Use the supplied connecting pieces to connect
the different units.
09
Mark the drill holes. Drill the holes and place the plugs. (08mm).
Fix the device to the floor, thanks to the height control in combi-
nation with the rubber sound decouplers.
Use the correct plug for your floor type.
11
If the device is not mounted directly on the floor, the space under
the device must be filled.
JAGA N.V. | CLIMA CANAL H13 B32 | MANUEL | 2024.10.11 | V.1.02
08
3X
Install the device with the coil facing the wall or window.
Curtains to the floor: Place the unit at least 20 cm from the
window.!
10
Use the control screws to adjust the unit to the desired height.
Secure the height.
Make sure that the top of the device is aligned with the finished
floor.
12
Remove black plug at hydronic connection.
hydronic connection: Overview of the coil connections When using
devices for cooling: iron couplings prohibited.
Use a back wrench when fastening the hydronic
connections
1
2
35
EN
Publicité
