Venmar EuroDesign EDJDN1 Serie Manuel D'installation, D'utilisation Et D'entretien page 14

Prepare the Hood Location
NOTE: Before starting installation, read all the steps of these instructions .
Use the illustration below to identify your kitchen cabinet type .
This manual covers 2 kinds of installation: the standard (without EZ1 brackets)
and the EZ1 one-person installation system (using included brackets) .
For the standard installation, go to page 16 .
The EZ1 installation system consists of 2 brackets (included in parts bag) . Use these brackets to
TEMPORARILY hang the hood to the cabinet during its installation .
Outer side of the bracket flush with hood side .
14
FRAMED CABINET
HH0248
EZ1 One-person installation system
A
A = 7" (± 1/16")
7" (± 1/16")
Back of hood/Wall
Arrière de la hotte/Mur
FRAMELESS CABINET
A