Publicité
Troubleshooting Guide
Before requesting service for this unit, check the chart below for a possible cause of the problem you are ex-
periencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore
proper operation. If you are in doubt about some of the check points, or if the remedies indicated in the chart
do not solve the problem, refer to the directory of PASC Factory Servicenters (enclosed with this unit).
PROBLEM
PROBABLE CAUSE
SUGGESTED REMEDY
No sound can be heard
| The power cord is not connected
Check power lead connection.
properly.
The ground connection is not done
Check ground lead connection.
properly.
Fuse is blown out.
Please refer to "Replacing the Fuse".
The car's ACC switch is off.
Turn on the ACC switch of car.
| Wiring connection is not done properly. | Check all wiring connections.
- |
Volume of cassette/CD player is not
Adjust the volume level.
adjusted properly.
Inverted sound of the left!
The speaker cord connections are in-
Check the speaker connection.
and right speakers dur- | verted.
ing stereo program.
Left or right speaker cord connection is | Check the speaker connection.
disconnected.
The balance control of cassette/CD
Adjust the balance control.
player is not adjusted properly.
No sound from either
The fader control of cassette/CD play- | Adjust the fader control.
front or rear speaker.
er is not adjusted properly.
No sound from either
left or right speaker.
9
CY-M7052EUC
Publicité
