Saitek CYBORG V. 1 FLIGHT STICK Guide D'utilisation page 2

Cyborg_V1_manual.qxd 24/03/2009
SAITEK CYBORG V.1 FLIGHT STICK
Fixing the stick legs to the base
1
Rotate the locking pins and pull them
out of the base.
3
Press down firmly until the legs click into
place.
14:36 Page 2
2
Insert the top of the leg unit into the base.
4
Insert the locking pins into the holes they
were removed from and rotate to secure.
2
Installation for users of Windows® XP, XP64 and Vista
Insert the Cyborg V.1 stick's USB cable into one of your PC's USB ports. Follow the device
installation wizard to complete the installation of the new USB device to the system. You can test
the controller at any time by clicking on Windows Start, Settings, Control Panel, Games Controllers.
Programming your Cyborg V.1 Flight Stick
The buttons and axes of your stick are all programmable using Saitek's SST programming
software. To download the software, go to www.saitek.com/uk/down/drivers.php, select the
Cyborg V.1 Flight Stick from the drop-down menu and download software. Download the SST
manual and follow the onscreen instructions to start programming.
Technical Support
Nearly all the products that are returned to us as faulty are not faulty at all - they have just not
been installed properly.
If you experience any difficulty with this product, please first visit our website www.saitek.com. The
technical support area will provide you with all the information you need to get the most out of your
product and should solve any problems you might have.
If you do not have access to the internet, or if the website cannot answer your question, please
contact your local Saitek Technical Support Team. We aim to offer quick, comprehensive and
thorough technical support to all our users so, before you call, please make sure you have all the
relevant information at hand.
To find your local Saitek Technical Support Center, please see the separate Technical Support
Center sheet that came packaged with this product.
Conditions of Warranty
1. Warranty period is 2 years from date of purchase with proof of purchase submitted.
2. Operating instructions must be followed.
3. Specifically excludes any damages associated with leakage of batteries.
Note: Batteries can leak when left unused in a product for a period of time, so it is advisable to
inspect batteries regularly.
4. Product must not have been damaged as a result of defacement, misuse, abuse, neglect,
accident, destruction or alteration of the serial number, improper electrical voltages or currents,
repair, alteration or maintenance by any person or party other than our own service facility or
an authorized service center, use or installation of non-Saitek replacement parts in the product
or the modification of this product in any way, or the incorporation of this product into any other
products, or damage to the product caused by accident, fire, floods, lightning, or acts of God, or
any use violative of instructions furnished by Saitek plc.
3