1
Draw a vertical line on the supporting wall as high as practical, at the center of the area in which
the hood will be installed.
Draw a horizontal line at where the bottom edge of the hood will be located as indicated in the figure
that is a minimum of 24" above cooking surface.
2
Mark the wall where indicated, 13
and right of vertical line. Checking that the two marks are level.
Insert two wall plugs (purchased separately) and two screws into the holes as shown.
Installation Instructions
Cooker Hood Installation
5
"
5
"
1/8
1/8
" above the horizontal line and at 6
1/4
x2
5/16"
Ø
x2
x2
x2
" distance on the left
7/16
12