Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1/2"
Ø
Mark the wall where indicated, 13
and right of vertical line. Checking that the two marks are level.
Insert two wall plugs (purchased separately) and two screws into the holes as shown.
Place a bracket 7.2.1 on the wall as shown about 1 1/8" from the ceiling or upper limit, aligning the
center (notch) with the vertical reference line and mark the wall at the centers of the holes in the bracket.
Place the second bracket 7.2.1 on the wall as shown, below the first bracket, at the height of the
upper chimney section supplied and aligning the center (notch) with the vertical line.
Mark the wall at the centers of the holes in the bracket and drill ø 5/16" as shown.
Installation screws provided for the Brackets, must be secured with wall plugs (purchased separately).
15
Cooker Hood Installation with optional Chimney
x4
x4
5
x2
x2
x2
x2
" above the horizontal line and at 6
1/4
" 5
"
1/8
1/8
>
2.1
2.2
2.1
" distance on the left
7/16
Publicité
Table des Matières
